Messages

1

Yate users hangout place / Burning Man

« on: August 16, 2014, 09:00:46 PM »

If any of the great yate folks, folks who kindly give us this great software, are coming to burning man this year, let me know. Though I am not going,  I will buy you a beer and show you around.

2

Linux / Re: Yate and KDE

« on: April 21, 2014, 12:45:10 AM »

Thanks!

3

Yate users hangout place / Re: buzz

« on: March 16, 2014, 01:13:36 AM »

I have been following this thread but fear I don't know enough about sip and all that to make a helpful response.  As reference to the below linux section shows, my relationship with yate is strong though occasionally unsatisfactory.  Lately it has been working well, for the most part (no buzz), but I still occasionally get a voice-quality complaint and I'm not sure why the buzz went away or whether it might come back..  As I learn more about yate and how to use it, voice quality complaints are getting less common.  I particularly love the address function on yate and its convenience.  Have not tried the video feature and not real sure yate even has one.

BTW, I did get a new office phone system but didn't go voip as I still haven't worked out enough of the voip bugs. As many folks use our phone system, I decided that reliability trumped expense.  But I still use yate whenever I can for any sort of long-distance calls and will use it more often when I figure out how to use the conference feature.

4

Linux / Re: yate won't start

« on: March 09, 2014, 10:39:49 PM »

 :)Well I give upalmost gave up.  Tried yate on debian and it worked fine.  But I don't use debian.  Tried it on salix, another slackware based distro and it worked fine for a while, but, as with vector linux, eventually stopped loading. So I am going to try qutecom or linphone. But, trying other things (such as deleting some of the foreign languages in calligra for heavens sake, and God only knows what else, yate started working again.  I am using yate 5 (updated with new version on slackbuilds.org).  I will report back if it stops working again.  I looked into how to get yate to listen on a different port, but gave up on that as this port business is pretty complicated. Anyway, my persistence here is some testimony to the virtues of yate.  I would not have bothered for so long otherwise. 

5

Linux / Re: yate won't start

« on: February 06, 2014, 01:04:54 PM »

I tried yate this morning on the new Vector Linux B3 64 bit, now out for beta testing and got the very same error, the error that prompted me to post here in the first place.  So here's the story:

1.  Yate worked just fine on my samsung RF511 runniung Vector Linux version 7.0 until a couple of months ago.
2.  Yate stopped working.  Or, perhaps more accurately, the yate gui stopped loading.
3.  Tried yate (from slackbuilds.org) on my lenovo laptop running Vector Linux version 7.1 this morning.  Gui still won't load.
4.  Yate runs fine on my Dell 260 laptop running Debian linux.
5.  Both my samsung and lenovo are about a year or two old.  The Dell is probably 7 years old.

Any Sherlock Holmes out there?

6

Linux / Re: yate won't start

« on: January 27, 2014, 11:57:19 AM »

No.

7

Linux / Re: yate won't start

« on: January 26, 2014, 10:47:23 PM »

Crazy problem it is.  I guess I will quit.  I don't think the problem is with yate, as I indicate above.  There is just something wrong with my system and I hate to reload cause I always break this or that.  What I have done instead is to install yate on a different laptop running a little later version of slackware (14.0).  Yate works fine on it, so absent some miracle solution, I will slowly.move my programs over to the other computer and use it.   And in the interim, carry around two laptops.  Bummer.

8

Linux / Re: yate won't start

« on: January 24, 2014, 09:32:32 AM »

marian,

no yate-qt4.log file is created when I run yate-qt4.  There is no yate-qt4.log file on my computer.

john

9

Linux / Re: yate won't start

« on: January 22, 2014, 08:55:59 PM »

Since vector 7.0 runs slackware 13.37, which is getting a bit long in the tooth, I tried 4.2.0 and it didn't give me a segmentation fault.  Yeah!  But it won't load as it doesn't find all necessary libraries.  So I loaded 4.3.0 again, which didn't work (segmentation fault).  Then I reinstalled 4.2.0 figuring I would try to find the right libraries and now 4.2.0 gives a segmentation fault.

I see there is a yate 5 out now and I will try it as soon as I find a slackware version.

10

Linux / Re: yate won't start

« on: January 17, 2014, 09:57:32 AM »

Unless I can do something different, running yate-qt4, as above, doesn't seem to create a yate-qt4.log:

vector://home/johwhi
root:# updatedb
vector://home/johwhi
root:# exit
vector:/~
johwhi:$ locate yate-qt4.log
vector:/~

11

Linux / Re: yate won't start

« on: January 16, 2014, 09:29:21 AM »

Still get segmentation fault

vector:/~
johwhi:$ yate-qt4 -vvvvv -tl /home/johwhi/yate-qt4.log
Segmentation fault
vector:/~

12

Linux / Re: yate won't start

« on: January 15, 2014, 09:40:42 AM »

I can't create the requested log file:

vector:/~
johwhi:$ locate yate-qt4
/etc/yate/yate-qt4.conf
/usr/bin/yate-qt4
/usr/share/applications/yate-qt4.desktop
/usr/lib/menu/yate-qt4.menu
vector:/~
johwhi:$ cd /usr/bin yate-qt4
vector://usr/bin
johwhi:$ yate-qt4
Segmentation fault
vector://usr/bin
johwhi:$ -lt
bash: -lt: command not found
vector://usr/bin
johwhi:$ su
Password:
You are working as root
Frequently used programs:
Configuration  : vasm
Package manager: slapt-get, pkg
Network tools  : ifconfig, host, ping, nmap, iptables
File manager   : mc (press F2 for useful menu)
Editor         : mcedit, nano, vi
Multimedia     : alsamixer, play
vector://usr/bin
root:# -lt
bash: -lt: command not found
vector://usr/bin
root:# yate-qt4 -vvvvv -lt yate.log
Segmentation fault
vector://usr/bin
root:# yate-qt4 -lt yate.log
Segmentation fault
vector://usr/bin

13

Linux / Re: yate won't start

« on: January 14, 2014, 05:57:23 PM »

here it is.  Or I probably should say, here I hope it is.

14

Linux / Re: yate won't start

« on: January 13, 2014, 10:18:01 AM »

vector:/~
johwhi:$ yate-qt4 -vvvvv -lt yate.log
Segmentation fault
vector:/~

Here is what I get when just typing yate:

vector:/~
johwhi:$ yate
Yate (2282) is starting Mon Jan 13 08:10:18 2014
Loaded module MsgSniffer
Loaded module Javascript
Loaded module RManager
Loaded module ExtModule
Loaded module DumbChannel
Loaded module CdrFile
Loaded module Analyzer
Loaded module ToneGen
Loaded module CdrBuild
Loaded module Conference
Loaded module MUX
Loaded module OpenSSL - based on OpenSSL 1.0.0d 8 Feb 2011
Loaded module Call Forker
Loaded module ZLib - using zlib library version 1.2.5
Loaded module PBX
Loaded module GVoice
Loaded module ToneDetector
Loaded module Speex - based on libspeex-1.1.16
Loaded module iLBC - based on iLBC reference library
Loaded module iSAC floating point - based on WebRTC iSAC library version 4.3.0 (SPL version 1.2.0)
Loaded module YIAX
Loaded module YJingle
Loaded module SIP Channel
Loaded module MOH
Loaded module YSOCKS
Loaded module YSTUN
Loaded module YRTP
Loaded module Call Generator
Loaded module File Transfer
Loaded module GSM - based on libgsm-1.0.10
Loaded module iLBC - based on WebRTC iLBC library version 1.1.1
Loaded module RegexRoute
Loaded module WaveFile
Loaded module CallCounters
Loaded module DbWave
Loaded module Heartbeat
Loaded module PostgreSQL
Loaded module Signalling Channel
Loaded module Monitoring
Loaded module MRCP
Loaded module Cisco SM
Loaded module Queues Notify
Loaded module Clustering
Loaded module Event Logs
Loaded module MGCP-GW
Loaded module SNMP Agent
Loaded module Register for database
Loaded module Call Parking
Loaded module Cache
Loaded module Presence
Loaded module Radius client
Loaded module Late Router
Loaded module SIP Features
Loaded module Registration from file
Loaded module CCongestion
Loaded module MGCP-CA
Loaded module Accounts from file
Loaded module SigTransport
Loaded module Queues
Loaded module Subscriptions
Loaded module Cpu
Loaded module Users Management
Loaded module Analog Detector
Loaded module MySQL based on 5.5.25
Loaded module Analog Channel
Loaded module PBX for database
Loaded module Jabber Server
Loaded module Jabber Server Features
Initializing plugins
Initializing module Jabber Server Features
Initializing module Jabber Server
Initializing module MySQL
Initializing module Analog Detector
Initializing module Cpu
Initializing module Subscriptions
Initializing module SigTransport
Initializing module MGCP Call Agent
Initializing module Event Logs
Initializing module Clustering
Initializing module Cisco SM
Initializing module PostgreSQL
Initializing module DbWave
Initializing module YSOCKS
Initializing module ZLib
Initializing module OpenSSL
Initializing module MUX
Initializing module CdrFile
Initializing module Javascript
Initializing module MsgSniffer
Initializing module RManager
<RManager:GOON> Failed to bind to 127.0.0.1:5038 : Address already in use
Initializing module ExtModule
Initializing module DumbChannel
DumbChannel initialized
Initializing module Analyzer
Initializing module ToneGen
Initializing module CdrBuild
Initializing module Conference
Initializing module Call Forker
Initializing module PBX
Initializing module GVoice
Initializing module ToneDetector
Initializing module iSAC
Initializing module YIAX
<iaxengine:WARN> Failed to bind socket on '0.0.0.0:4569' - trying a random port. 98: 'Address already in use'
Initializing module YJingle
Initializing module SIP Channel
Initializing module MOH
<sip:WARN> Listener(UDP,'general') unable to bind on '0.0.0.0:5060' - trying a random port. 98 'Address already in use'
Initializing module YSTUN
Initializing module YRTP
Initializing module Call Generator
Initializing module File Transfer
Initializing module iLBC webrtc
Initializing module RegexRoute
Initializing module WaveFile
Initializing module Signalling Channel
Initializing module Monitoring
Initializing module MrcpSpeech
Initializing module Queues Notify
Initializing module MGCP Gateway
<mgcp_gw:WARN> Failed to bind socket to :2427. Error: 98: Address already in use
Initializing module SNMP Agent
<snmpagent:WARN> Could not bind SNMP UDP Listener, error 13 Permission denied
Initializing module Register for database
Initializing module Call Parking
Initializing module Cache
Initializing module Presence
Initializing module Radius client
Initializing module Late Router
Initializing module SIP Features
Initializing module Register from file
Initializing module CCongestion
Initializing module Accounts from file
Initializing module Queues for database
Initializing module Users Management
Initializing module Analog Channel
Initializing module PBX for database
Initialization complete
Yate engine is initialized and starting up on vector.linux.net

15

Linux / Re: yate won't start

« on: January 11, 2014, 03:36:22 PM »

thanks. that gives a segmentation fault

vector:/~
johwhi:$ yate-qt4
Segmentation fault
vector:/~
johwhi:$ su
Password:
You are working as root
Frequently used programs:
Configuration  : vasm
Package manager: slapt-get, pkg
Network tools  : ifconfig, host, ping, nmap, iptables
File manager   : mc (press F2 for useful menu)
Editor         : mcedit, nano, vi
Multimedia     : alsamixer, play
vector://home/johwhi
root:# yate-qt4
Segmentation fault
vector://home/johwhi