Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - habibur333

Pages: [1] 2
1
Yate users hangout place / How to reject or filter Mobile station from my service.
« on: January 29, 2015, 03:52:57 PM »
Hi everyone.
On subscribers.conf file i used
regexp=.*
thats why it is now on open registration and any mobile station can easily connect with yatebts.
At present i have no sim card writer . is there any way to block some mobile station or reject there connection without using sim card? Or any  filtering system to maintain the connection of expected mobiles and ban the others.Thanks

2
YateBTS / Running YateBTS on BladeRF (Video)
« on: January 16, 2015, 02:04:25 AM »
I have installed YateBTS sucessfully on my bladerf x115 device. You may see the video from this link.(http://youtu.be/3iirE8xuji4). if u have any question ,Please ask me without any hesitation in Twitter.(https://twitter.com/Habibur18495307). Thanks

3
YateBTS / Re: YateBTS with bladeRF x40 : no visible network
« on: January 11, 2015, 03:18:08 AM »
ya  jynik

i believe your last comment will be very helpful for yatebts user through BladeRF device. may be the lib version of bladerf  is now more specify.Thanks

4
YateBTS / Re: YateBTS with bladeRF x40 : no visible network
« on: January 10, 2015, 12:31:12 PM »
hi

on fresh ubuntu 14.04 i tried paulc method (in this thread) . it also worked. in this case no need of patch but have to change the bladerf lib and firmware also. may be this firmware and lib is old version.thanks

5
YateBTS / Re: I have problem with starting Yate with my BladeRF, please help
« on: January 09, 2015, 03:19:18 PM »
 if you faced this problem ,you may follow this link (http://forum.yate.ro/index.php?topic=372.msg1098#msg1098). this instruction was great at site of me

6
YateBTS / Re: bladeRF rssi issues
« on: December 31, 2014, 05:51:33 AM »
Hi Tsarik
Please mention the OS version, device model and
bladeRF> version
thanks .

7
YateBTS / YateBts Running problem-assuming TRX is dead
« on: December 26, 2014, 11:10:52 AM »
hi everyone.
i am using bladerf x115 with ubuntu 14.04. i am trying to run YateBts. when i use this command .sudo yate -sd -vvvvv -l /var/yate.log. my radio device response and the output of log file is
  Primitive: RadioReady
    Info: 0
    -----
    2014-12-22_23:18:19.818500 <ybts:NOTE> State changed Running -> RadioUp
    ALERT 140558074234624 23:18:23.0 TRXManager.cpp:500:setSlot: SETSLOT failed with status -1
    2014-12-22_23:18:23.060594 <mbts:WARN> TRXManager.cpp:500:setSlot: SETSLOT failed with status -1
    ALERT 140558074234624 23:18:23.0 TRXManager.cpp:500:setSlot: SETSLOT failed with status -1
    2014-12-22_23:18:23.061568 <mbts:WARN> TRXManager.cpp:500:setSlot: SETSLOT failed with status -1
    ALERT 140558075676416 23:18:25.0 TRXManager.cpp:460:setPower: SETPOWER failed with status -1
    2014-12-22_23:18:25.065011 <mbts:WARN> TRXManager.cpp:460:setPower: SETPOWER failed with status -1
    ALERT 140558075676416 23:18:31.0 TRXManager.cpp:460:setPower: SETPOWER failed with status -1
    2014-12-22_23:18:31.065464 <mbts:WARN> TRXManager.cpp:460:setPower: SETPOWER failed with status -1
    EMERG 140558112577280 23:18:44.2 TRXManager.cpp:96:clockHandler: TRX clock interface timed out, assuming TRX is dead.
    2014-12-22_23:18:44.228273 <mbts:GOON> TRXManager.cpp:96:clockHandler: TRX clock interface timed out, assuming TRX is dead.


i already change USB cable, and also use an external power source , and also try another laptop with fresh ubuntu 14.04. but still say

TRX clock interface timed out, assuming TRX is dead

please any one give me any tips or idea about this problem. Thanks

8
Installation from packets/SVN/.exe/AppStore / Re: powerOff: POWEROFF failed with status -1
« on: December 26, 2014, 10:50:35 AM »
Ya solve it. its not a  problem. the people who successfully run yatebts most of them face this. its only a warning.Thanks

9
YateBTS / Re: YateBTS initial setup with bladeRF x115
« on: December 24, 2014, 12:45:03 AM »
ya i faced same problem. and this solution is great.thanks

10
YateBTS / Re: YateBTS with bladeRF x40 : no visible network
« on: December 21, 2014, 08:58:45 AM »
Hi Odiebla
You may try this
http://nuand.com/forums/viewtopic.php?f=4&t=3665
if it work please inform me.

11
YateBTS / Re: YateBTS with bladeRF x40 : no visible network
« on: December 12, 2014, 02:27:45 AM »
please see the update
hi  Odiebela ,
may be u have something like this on our log file

ALERT 140371742193536 07:20:27.7 TRXManager.cpp:430:powerOff: POWEROFF failed with status -1
2014-12-11_07:20:27.721808 <mbts:NOTE> TRXManager.cpp:293:sendCommandPacket: lost control link to transceiver
2014-12-11_07:20:27.722302 <mbts:WARN> TRXManager.cpp:430:powerOff: POWEROFF failed with status -1
2014-12-11_07:20:27.789979 <mbts:NOTE> OpenBTS.cpp:144:startTransceiver: starting transceiver ./transceiver-bladerf w/ 1 ARFCNs and Args:
2014-12-11_07:20:28.403054 <transceiver:NOTE> bladeRFDevice.cpp:106:open: Opened bladeRF serial=bf922ab76ae11915ff145093139e3eb7 firmware version$
2014-12-11_07:20:29.021937 <transceiver:NOTE> Transceiver.cpp:68:Transceiver: running 1 ARFCNs with oversampling 4

if it occure first of all you have to solve the power off problem. thanks

update: its not a problem. its only a warning and there is no effect of this warning. i run two bladerf and both has same warning but fully operational.

12
Installation from packets/SVN/.exe/AppStore / powerOff: POWEROFF failed with status -1
« on: December 11, 2014, 07:50:04 AM »
Hi every one.
when i run sudo yate -sd -vvvvv -l /var/yate.log. the log file show me this error.


ALERT 140371742193536 07:20:27.7 TRXManager.cpp:430:powerOff: POWEROFF failed with status -1
2014-12-11_07:20:27.721808 <mbts:NOTE> TRXManager.cpp:293:sendCommandPacket: lost control link to transceiver
2014-12-11_07:20:27.722302 <mbts:WARN> TRXManager.cpp:430:powerOff: POWEROFF failed with status -1
2014-12-11_07:20:27.789979 <mbts:NOTE> OpenBTS.cpp:144:startTransceiver: starting transceiver ./transceiver-bladerf w/ 1 ARFCNs and Args:
2014-12-11_07:20:28.403054 <transceiver:NOTE> bladeRFDevice.cpp:106:open: Opened bladeRF serial=bf922ab76ae11915ff145093139e3eb7 firmware version$
2014-12-11_07:20:29.021937 <transceiver:NOTE> Transceiver.cpp:68:Transceiver: running 1 ARFCNs with oversampling 4

and hence my transceiver tx rx  led not blinking. is there any solution about POWEROFF failed with status -1? Thanks

13
Installation from packets/SVN/.exe/AppStore / Re: <ybts:CONF> Missing radio band or C0 configuration
« on: December 11, 2014, 07:35:31 AM »
Ya, you are right. Thats great solution for me. Thanks a lot.

14
Installation from packets/SVN/.exe/AppStore / <ybts:CONF> Missing radio band or C0 configuration
« on: December 09, 2014, 06:33:03 AM »
When i write this command ''sudo yate -sd -vvvvv -l /var/yate.log''  the log file show me
<ybts:CONF> Missing radio band or C0 configuration
but i edit my ybts.conf file by Nano text editor by this command  sudo nano ybts.conf.  and save it.
i use
Radio.Band=1800
Radio.C0=512..885
 but showing the same thing.i also set the transceiver path as Path=./transceiver-bladerf

15
Installation from packets/SVN/.exe/AppStore / Re: Yate not start
« on: December 08, 2014, 05:02:57 AM »
Thanks for your replay. Actually i want to run yatebts on my bladerf X115. i installed everything from the instruction of wiki. i also edit ybts.conf file. now i don,t know what is the next step as ''sudo yate -sd -vvvvv -l /var/log/yate.log'' showing nothing.my first target is just see my own network on my cell phone.and then i will configure NIB.  after installing everything what should i have to do(specially some command) for runing a gsm network on my bladerf x115. please someone help me about this issue.

Pages: [1] 2