Author Topic: Yate datacard channel driver for Huawei UMTS modem  (Read 4163 times)

Diana Cionoiu

  • Administrator
  • Jr. Member
  • *****
  • Posts: 71
    • View Profile
Yate datacard channel driver for Huawei UMTS modem
« on: November 14, 2012, 04:45:51 PM »
I've just discovered today "Yate datacard channel driver for Huawei UMTS modem" at http://code.google.com/p/yate-datacard/

Is anyone using it?

cc08

  • Guest
Re: Yate datacard channel driver for Huawei UMTS modem
« Reply #1 on: November 18, 2012, 03:33:59 PM »
Hi, Diana!

Dataсard module works for me about 1 year.
Works with 4 usb modem huawei E173, and correspondingly, with 4 different gsm providers in Russia.
I am used only voice function.
Ussd sms still work, but I am do not use.
After updating to build 154, I stopped watching periodic restarts yate.
Author promptly responds to reports with bugs.
In general I am quite happy with this unit.


Best regards,
cc08.

Diana Cionoiu

  • Administrator
  • Jr. Member
  • *****
  • Posts: 71
    • View Profile
Re: Yate datacard channel driver for Huawei UMTS modem
« Reply #2 on: November 18, 2012, 11:03:01 PM »
That's so freaking cool :)

cc08

  • Guest
Re: Yate datacard channel driver for Huawei UMTS modem
« Reply #3 on: November 19, 2012, 12:23:50 AM »
Yes,  I like it...  :)

On the Internet  scattered many the crumbs of useful pieces of code to Yate.
Maybe Yate team need to use this, and as coordinator of the project, arrange inspection and integration of code to the project.
It seems that the team has frozen the project (although it may have planned to stage monetization project?).
By the way, if you make on the forum under "wishes", will be seen what is missing in Yate.


Best regards

Doug

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: Yate datacard channel driver for Huawei UMTS modem
« Reply #4 on: February 18, 2015, 03:29:08 PM »
Hi cc08,

I use 4x Huawei E1550, DUB-H7 (7-Port USB hub) and works great, but sometimes I have problems with the doors, I believe is related to the power.

cc08

  • Guest
Re: Yate datacard channel driver for Huawei UMTS modem
« Reply #5 on: February 19, 2015, 01:28:29 PM »
Hi, Doug,

I do not understand what you mean under the "doors" :)
But power should be enough.
Instability I noticed when connect a second modem.
Now I have the same hub with three modems E173.
Frequent failures at the end of the conversation and always with simultaneous operation of modems.
And always in both cases leads to restart the engine.
I think the problem is in the code datacard module.


« Last Edit: February 19, 2015, 01:31:17 PM by cc08 »

Doug

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: Yate datacard channel driver for Huawei UMTS modem
« Reply #6 on: February 20, 2015, 06:42:29 AM »
Hi cc08,

Sorry, but my english is not good. I have not explained properly, the modem loses communication with the USB ports. I have tested a similar module with FreeSWITCH and it is the same.

I think this project has great potential. I'm not a professional programmer, but I would like to contribute to this module.  ;)

Regards, Doug

cc08

  • Guest
Re: Yate datacard channel driver for Huawei UMTS modem
« Reply #7 on: May 25, 2015, 02:31:01 AM »
Hi, Doug!

You can directly contact with author of datacard module.
Possible he help.
But first, make sure there are no problems with the power supply.