OpenLTE > YateBTS
Proxy Authentication Required? when trying to outbound call
(1/1)
Ramzu:
Hi everyone,
I input my sip credentials (Zadarma) in the outbound connection part of the nipc web interface, but still can't make calls outside of the network. Instead I read in the terminal output, after it stated at the start that the sip logon was successful, that proxy authentication is required. Can anyone tell me what I am doing wrong and advise the correct way forward? Thanks.
P.S. part of the terminal out put is this:
<CC>
<TID TIFlag="true">0</TID>
<Message type="Release">
<Cause coding="GSM-PLMN" location="LPN">Proxy Authentication Required</Cause>
</Message>
</CC>
-----
2021-04-26_06:47:46.372019 <ybts/2:CALL> Hangup reason='Proxy Authentication Required' [0x7f5fb000aa10]
2021-04-26_06:47:46.372043 <ybts/2:CALL> Destroyed [0x7f5fb000aa10]
2021-04-26_06:47:46.507520 <ybts-signalling:INFO> Received [0x55728a814900]
Monica Tepelus:
Hi Ramzu,
Please post content of accfile.conf and a full log for a call with sniffer activated.
>> telnet 0 5037
debug mbts off
debug sip level 10
sniffer on
Ramzu:
Thanks for the reply. Telnet (telnet: Unable to connect to remote host: Connection refused). I couldnt seem to activate sniffer but here is the accfile.conf and log:
[outbound]
protocol=sip
username=xxxxx
server=sip.zadarma.com
password=xxxxxxxx
ip_transport=UDP
enabled=yes
match_port=yes
match_user=yes
formats=
Monica Tepelus:
Please configure rmanager module if you can't connect using telnet. There aren't enough information in the current log.
https://docs.yate.ro/wiki/Rmanager
ip 127.0.0.1
port 5037
How did you install YateBTS? This should come by default in the labkit.
Ramzu:
I got it working! In the nipc web interface in the "Outgoing" section i unchecked "Match user" and in "Caller" i clicked "Use username". Thanks for the help!!!!
Navigation
[0] Message Index
Go to full version