Yate server > SIP to H.323 proxy
Yate sending an incorrect address to PBX
marian:
The log shows a call to a sip line (lync) who is not registered.
There is no such line.
Also the correct regexroute target to route is:
rule=sip/01032;line=lync
hilander:
The rule does not work.
The logs found that the H323 module tries to connect to the PBX over TCP. PBX can be connected only by UDP. Is it possible for the module H323 forced to run only on UDP?
marian:
Can you be more clear?
What do you mean by rule not working? Does it match? Is the line connected?
I don't understand the other phrase.
Which h323 module tries to connect to which PBX?
hilander:
The phrase "rule does not work," I mean, the connection between Lync and IPGW PBX via Yate did not take place.
The logs Yate shows that YATE is trying to connect to the IPGW PBX transport - TCP.
IPGW PBX supports only the protocol H323, transport - UDP. In an exchange of signaling messages between IPGW PBX and YATE gives an error message.
Line Yate-Lync shows no errors.
marian:
I'm afraid you lost me.
Is the sip line connected or not?
Can you post again the config files, including the accfile.conf (I suppose you are using it to login on sip)?
Can you post a wireshark capture to see the sip account login and a failed call?
Post yate log also.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version