Yate server > Yate bugs
enable H264 video support in YATE
roy:
Hi,
Thanks a lot for your reply.
I will apply this fix and check it and let you know. Thanks again for the reply.
Best Regards,
Roy
roy:
Hi cc08,
Thanks for the patch file. I applied it but it did not help. Still the same issue.
Still waiting for an answer from the YATE team.
Best Regards,
Roy.
Prateek:
Hi Team,
I am trying to get video calls (H323 to SIP) via YATE and still faild to get it up.
This is my Setup :
I want to make call from H323 to SIP via Yate. Both ends are registered successfully with their respective IP's. The Issue is based on Video Call, only i can make voice call via Yate not a Video one.
This is the information :
1. All setup is inside the LAN.
2. Running YATE 4.2.
3. Both clients can register and can place voice calls.
5. when I try to establish the video call it does not.
6. Codec is H264 and I have set the
h263-1998/90000=yes
h264/90000=yes
h263-1998=yes
h263=yes
h264=yes
in ysipchan.conf
7. Only the Audio Codec is seen by default in the Open Logical Channel in the below Wireshark. How to get Video Codecs too.
Best Regards,
Prateek
Navigation
[0] Message Index
[*] Previous page
Go to full version