Yate Community Forum

OpenLTE => YateBTS => Topic started by: dsshap on August 24, 2016, 05:34:26 PM

Title: YateBTS, RPI3, BladeRF115 <-> Telit LTE Cat 1 module
Post by: dsshap on August 24, 2016, 05:34:26 PM

Hi,

I am attempting to connect an Telit LTE Cat1 module (north america) to YateBTS (running on RPI3 and BladeRF).

I have configured the software and am able to start Yate successfully. But I am having difficulty getting the module to recognize the network (I send "AT+COPS=?" and only AT&T is returned).

My YateBTS config is below:
Radio.Band=850
Radio.C0=128
Identity.MCC=001
Identity.MNC=01
Radio.PowerManager.MaxAttenDB=35
Radio.PowerManager.MinAttenDB=35

In the NIB, I am seeing that there are some online subscribers but the IMSI does not match my telit module imsi.

Any help with this would be much appreciated, thank you!

Title: Re: YateBTS, RPI3, BladeRF115 <-> Telit LTE Cat 1 module
Post by: Monica Tepelus on August 25, 2016, 01:47:45 AM

Hi,

Does Telit LTE Cat1support GSM/GPRS or is it only for LTE/3G?

Title: Re: YateBTS, RPI3, BladeRF115 <-> Telit LTE Cat 1 module
Post by: dsshap on August 25, 2016, 11:53:18 AM

LTE with 3G fallback

Title: Re: YateBTS, RPI3, BladeRF115 <-> Telit LTE Cat 1 module
Post by: Monica Tepelus on August 26, 2016, 02:01:30 AM

Then you will have to wait for the LTE labkit to come out.

YateBTS only supports GSM and GPRS.