Yate Community Forum

OpenLTE => YateBTS => Topic started by: nurwalid on April 23, 2015, 12:09:12 AM

Title: [SOLVED] cannot understand on telnet
Post by: nurwalid on April 23, 2015, 12:09:12 AM
(http://i1237.photobucket.com/albums/ff477/Nurwalid_Ina/PA/Screenshot%20from%202015-04-23%20130122.png) (http://s1237.photobucket.com/user/Nurwalid_Ina/media/PA/Screenshot%20from%202015-04-23%20130122.png.html)

what should i do with this??
Title: Re: cannot understand on telnet
Post by: Ioana Stanciu on April 23, 2015, 01:13:00 AM
Hi,

Most likely the ybts module is not loaded.
Try 'status ybts' or 'status mbts' in the rmanager console. If it's showing as a result
%%+status:ybts
%%-status

then you don't have the module loaded.
Check your configuration and that the path from where you're loading modules contains ybts.
You can check from where yate tries to load modules by typing in rmanager the command 'status engine' and look at the 'modulepath' parameter .
Title: Re: cannot understand on telnet
Post by: nurwalid on April 23, 2015, 09:00:02 AM
(http://i1237.photobucket.com/albums/ff477/Nurwalid_Ina/PA/Screenshot%20from%202015-04-23%20215054.png) (http://s1237.photobucket.com/user/Nurwalid_Ina/media/PA/Screenshot%20from%202015-04-23%20215054.png.html)

(http://i1237.photobucket.com/albums/ff477/Nurwalid_Ina/Screenshot%20from%202015-04-23%20215653.png) (http://s1237.photobucket.com/user/Nurwalid_Ina/media/Screenshot%20from%202015-04-23%20215653.png.html)

like that? after that, what should i do oana?
Title: Re: cannot understand on telnet
Post by: nurwalid on April 23, 2015, 07:24:49 PM
SOLVED !! thanks oana

edit file yate.conf on /usr/local/etc/yate/

[general]
modload=no ===> modload=yes