Messages

1

YateBTS / Re: USRP on YateBTS

« on: April 03, 2015, 04:44:41 AM »

No problem,

If you need any help let me know,

2

YateBTS / Re: Issues with SMS and selection after David asnwers

« on: March 30, 2015, 05:37:11 AM »

Hi Guys.

I have managed to get YATEBts installed and working,

I can make calls between handsets and it works perfectly.

The only issues I am having is that the IVR does not answer the call just drops when i dial the number.

Also I would like to change the SMS Welcome message, i would like to add more text but for the life of me I cant find the config file for this.

Also I would like to be able to edit the MISDN numbers after they are provisioned. But again there is not much info in relation to this.

Is it possible to list the connected IMEI as it would be useful to be able to get a user to do a *#06# to find their phone in the list. Obviously I have left the BTS open as where I am there is no cell coverage whatso ever/

Regard

3

YateBTS / Re: USRP on YateBTS

« on: March 28, 2015, 07:01:56 AM »

Hi Nurwalid

The USRP B210 Works with Yate without any issues,

You need to ensure you have the  Uhd Software and drivers to your linux box.

When you have done that issue the command uhd_find_devices it should at that point show your usrp type and serial number

You can also issue uhd_usrp_probe it will dump firmware on the USRP and check it,  and give you a responce.

then in change your ybts.conf in /usr/local/etc/yate change the line in transceciver   path=./transceiver-uhd

Then launch yate if you have done everything right you will get a red light on the rx/tx port and a green light on the rx port.

Hope this helps