Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - johnnyboy

Pages: [1]
1
YateBTS / Re: USRP x310, no connection to transceiver
« on: September 02, 2015, 05:46:59 AM »
Yes I see all.

4156920   1275.096578000   127.0.0.1   127.0.0.1   GSM SMS   83   I, N(R)=0, N(S)=1(DTAP) (SMS) CP-DATA (RP) RP-DATA (MS to Network)

It say that the RP-User Data is of length 14 but there nothing more. I think I have the wrong decoder os something like this...

2
YateBTS / Re: USRP x310, no connection to transceiver
« on: September 02, 2015, 04:48:39 AM »
Hmm I think not...
Another question, I'm trying to see my sms in wireshark but can't. I enable the GSM TAP in ybts.conf and use the gsm_sms filter. I see frame but didn't see my SMS in TP-USER DATA. DId I need a special configuration on wireshark ? thanks

3
YateBTS / Re: USRP x310, no connection to transceiver
« on: September 02, 2015, 03:37:33 AM »
Now the BTS is working but when she is running for a while and phone try to connect, i get a "crash" and the yateBTS restart, here is the log:
Anyone has an idea what is wrong ?
Phone IMSI are in subscribers, with random Ki.

Primitive: RadioReady
Info: 0
-----
2015-09-02_11:29:25.114825 <ybts:NOTE> State changed Running -> RadioUp
2015-09-02_11:29:50.600313 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 1
2015-09-02_11:29:50.600337 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-02_11:29:50.600372 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 1
2015-09-02_11:29:50.600384 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-02_11:29:50.895603 <ybts-signalling:INFO> Received [0xa26970]
-----
Primitive: PhysicalInfo
Info: 0
Connection: 1

<PhysicalInfo>TA=0 TE=-0.109 UpRSSI=-62 TxPwr=33 DnRSSIdBm=-111 time=1441186190.613</PhysicalInfo>
-----
2015-09-02_11:29:50.895675 <ybts-signalling:INFO> Received [0xa26970]
-----
Primitive: L3Message
Info: 0
Connection: 1

<MM>
  <SkipIndicator>0</SkipIndicator>
  <NSD>0</NSD>
  <Message type="LocationUpdatingRequest">
    <LocationUpdatingType>
      <FOR>false</FOR>
      <LUT>normal-location-updating</LUT>
    </LocationUpdatingType>
    <CipheringKeySequenceNumber>no-key/reserved</CipheringKeySequenceNumber>
    <LAI>
      <PLMNidentity>00101</PLMNidentity>
      <LAC>fffe</LAC>
    </LAI>
    <MobileStationClassmark>
      <RFPowerCapability>class4</RFPowerCapability>
      <RevisionLevel>GSM-phase2</RevisionLevel>
      <Flags>ES-IND</Flags>
    </MobileStationClassmark>
    <MobileIdentity>
      <IMSI>228014420990668</IMSI>
    </MobileIdentity>
  </Message>
</MM>
-----
2015-09-02_11:29:50.895684 <ybts-signalling:ALL> Added connection (0x7f75ac002210,1) [0xa26970]
2015-09-02_11:29:50.895694 <ybts-mm:ALL> Handling LocationUpdatingRequest conn=1: ident=IMSI/228014420990668 LAI=00101_fffe [0xa26d50]
2015-09-02_11:29:50.895699 <ybts-mm:ALL> Added UE (0x7f75ac0023b0) TMSI= IMSI=228014420990668 [0xa26d50]
2015-09-02_11:29:50.895704 <ybts-signalling:ALL> Connection 1 set UE (0x7f75ac0023b0) TMSI= IMSI=228014420990668 [0x7f75ac002210]
2015-09-02_11:29:50.895723 <ybts-signalling:INFO> Sending [0xa26970]
-----
Primitive: L3Message
Info: 0
Connection: 1

<MM>
  <Message type="IdentityRequest">
    <IdentityType>IMEI</IdentityType>
  </Message>
</MM>
-----
2015-09-02_11:29:51.366181 <ybts-signalling:INFO> Received [0xa26970]
-----
Primitive: PhysicalInfo
Info: 0
Connection: 1

<PhysicalInfo>TA=0 TE=-0.133 UpRSSI=-60 TxPwr=33 DnRSSIdBm=-111 time=1441186190.600</PhysicalInfo>
-----
2015-09-02_11:29:51.366221 <ybts-signalling:INFO> Received [0xa26970]
-----
Primitive: L3Message
Info: 0
Connection: 1

<MM>
  <SkipIndicator>0</SkipIndicator>
  <NSD>1</NSD>
  <Message type="IdentityResponse">
    <MobileIdentity>
      <IMEI>354091055809510</IMEI>
    </MobileIdentity>
  </Message>
</MM>
-----
2015-09-02_11:29:51.366287 <ybts:ALL> Started location updating thread for (0x7f75ac0023b0) TMSI= IMSI=228014420990668 [0x7f75ac0024f0]
2015-09-02_11:29:51.366400 <nib:INFO> Got user.register for imsi='228014420990668', tmsi=''
2015-09-02_11:29:51.366419 <nib:INFO> Searching imsi in subscribers.
2015-09-02_11:29:51.366733 <ybts:ALL> Location updating thread for (0x7f75ac0023b0) TMSI= IMSI=228014420990668 terminated [0x7f75ac0024f0]
2015-09-02_11:29:51.366743 <ybts-mm:ALL> UE (0x7f75ac0023b0) TMSI= IMSI=228014420990668 register failed [0xa26d50]
2015-09-02_11:29:51.366765 <ybts-signalling:INFO> Sending [0xa26970]
-----
Primitive: L3Message
Info: 0
Connection: 1

<MM>
  <Message type="LocationUpdatingReject">
    <RejectCause>failure</RejectCause>
  </Message>
</MM>
-----
2015-09-02_11:29:51.366779 <ybts-signalling:ALL> Releasing connection (0x7f75ac002210,1) [0xa26970]
2015-09-02_11:29:51.366785 <ybts-signalling:INFO> Sending [0xa26970]
-----
Primitive: ConnRelease
Info: 0
Connection: 1
-----
2015-09-02_11:30:22.003260 <ybts-signalling:ALL> Removing released connection 1 [0xa26970]
2015-09-02_11:30:22.003279 <ybts-mm:ALL> Removed UE (0x7f75ac0023b0): destroyed [0xa26d50]
2015-09-02_11:30:22.003285 <ybts:ALL> UE destroyed [0x7f75ac0023b0]
2015-09-02_11:31:04.049767 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 1
2015-09-02_11:31:04.049790 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-02_11:31:04.049825 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 1
2015-09-02_11:31:04.049833 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-02_11:31:04.334970 <ybts-signalling:INFO> Received [0xa26970]
-----
Primitive: PhysicalInfo
Info: 0
Connection: 2

<PhysicalInfo>TA=0 TE=-0.031 UpRSSI=-63 TxPwr=33 DnRSSIdBm=-88 time=1441186264.062</PhysicalInfo>
-----
2015-09-02_11:31:04.335040 <ybts-signalling:INFO> Received [0xa26970]
-----
Primitive: L3Message
Info: 0
Connection: 2

<MM>
  <SkipIndicator>0</SkipIndicator>
  <NSD>0</NSD>
  <Message type="LocationUpdatingRequest">
    <LocationUpdatingType>
      <FOR>false</FOR>
      <LUT>normal-location-updating</LUT>
    </LocationUpdatingType>
    <CipheringKeySequenceNumber>no-key/reserved</CipheringKeySequenceNumber>
    <LAI>
      <PLMNidentity>00101</PLMNidentity>
      <LAC>fffe</LAC>
    </LAI>
    <MobileStationClassmark>
      <RFPowerCapability>class4</RFPowerCapability>
      <RevisionLevel>GSM-phase2</RevisionLevel>
      <Flags>ES-IND</Flags>
    </MobileStationClassmark>
    <MobileIdentity>
      <IMSI>228014420990668</IMSI>
    </MobileIdentity>
  </Message>
</MM>
-----
2015-09-02_11:31:04.335049 <ybts-signalling:ALL> Added connection (0x7f75ac0029f0,2) [0xa26970]
2015-09-02_11:31:04.335057 <ybts-mm:ALL> Handling LocationUpdatingRequest conn=2: ident=IMSI/228014420990668 LAI=00101_fffe [0xa26d50]
2015-09-02_11:31:04.335062 <ybts-mm:ALL> Added UE (0x7f75ac0026d0) TMSI= IMSI=228014420990668 [0xa26d50]
2015-09-02_11:31:04.335066 <ybts-signalling:ALL> Connection 2 set UE (0x7f75ac0026d0) TMSI= IMSI=228014420990668 [0x7f75ac0029f0]
2015-09-02_11:31:04.335082 <ybts-signalling:INFO> Sending [0xa26970]
-----
Primitive: L3Message
Info: 0
Connection: 2

<MM>
  <Message type="IdentityRequest">
    <IdentityType>IMEI</IdentityType>
  </Message>
</MM>
-----
2015-09-02_11:31:04.806391 <ybts-signalling:INFO> Received [0xa26970]
-----
Primitive: PhysicalInfo
Info: 0
Connection: 2

<PhysicalInfo>TA=0 TE=-0.031 UpRSSI=-60 TxPwr=33 DnRSSIdBm=-88 time=1441186264.050</PhysicalInfo>
-----
2015-09-02_11:31:04.806430 <ybts-signalling:INFO> Received [0xa26970]
-----
Primitive: L3Message
Info: 0
Connection: 2

<MM>
  <SkipIndicator>0</SkipIndicator>
  <NSD>1</NSD>
  <Message type="IdentityResponse">
    <MobileIdentity>
      <IMEI>354091055809510</IMEI>
    </MobileIdentity>
  </Message>
</MM>
-----
2015-09-02_11:31:04.806472 <ybts:ALL> Started location updating thread for (0x7f75ac0026d0) TMSI= IMSI=228014420990668 [0x7f75ac0024f0]
2015-09-02_11:31:04.806587 <nib:INFO> Got user.register for imsi='228014420990668', tmsi=''
2015-09-02_11:31:04.806605 <nib:INFO> Searching imsi in subscribers.
2015-09-02_11:31:04.806904 <ybts:ALL> Location updating thread for (0x7f75ac0026d0) TMSI= IMSI=228014420990668 terminated [0x7f75ac0024f0]
2015-09-02_11:31:04.806912 <ybts-mm:ALL> UE (0x7f75ac0026d0) TMSI= IMSI=228014420990668 register failed [0xa26d50]
2015-09-02_11:31:04.806931 <ybts-signalling:INFO> Sending [0xa26970]
-----
Primitive: L3Message
Info: 0
Connection: 2

<MM>
  <Message type="LocationUpdatingReject">
    <RejectCause>failure</RejectCause>
  </Message>
</MM>
-----
2015-09-02_11:31:04.806946 <ybts-signalling:ALL> Releasing connection (0x7f75ac0029f0,2) [0xa26970]
2015-09-02_11:31:04.806957 <ybts-signalling:INFO> Sending [0xa26970]
-----
Primitive: ConnRelease
Info: 0
Connection: 2
-----
Remote connection from 127.0.0.1:58861 to 127.0.0.1:5038
2015-09-02_11:31:35.004327 <ybts-signalling:ALL> Removing released connection 2 [0xa26970]
2015-09-02_11:31:35.004347 <ybts-mm:ALL> Removed UE (0x7f75ac0026d0): destroyed [0xa26d50]
2015-09-02_11:31:35.004382 <ybts:ALL> UE destroyed [0x7f75ac0026d0]
2015-09-02_11:32:08.328163 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 1
2015-09-02_11:32:08.328184 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-02_11:32:08.328208 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 1
2015-09-02_11:32:08.328214 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-02_11:32:08.831377 <ybts-signalling:INFO> Received [0xa26970]
-----
Primitive: PhysicalInfo
Info: 0
Connection: 3

<PhysicalInfo>TA=0 TE=-0.434 UpRSSI=-56 TxPwr=33 DnRSSIdBm=-78 time=1441186328.341</PhysicalInfo>
-----
2015-09-02_11:32:08.831447 <ybts-signalling:INFO> Received [0xa26970]
-----
Primitive: L3Message
Info: 0
Connection: 3

<MM>
  <SkipIndicator>0</SkipIndicator>
  <NSD>0</NSD>
  <Message type="LocationUpdatingRequest">
    <LocationUpdatingType>
      <FOR>false</FOR>
      <LUT>normal-location-updating</LUT>
    </LocationUpdatingType>
    <CipheringKeySequenceNumber>no-key/reserved</CipheringKeySequenceNumber>
    <LAI>
      <PLMNidentity>22801</PLMNidentity>
      <LAC>fffe</LAC>
    </LAI>
    <MobileStationClassmark>
      <RFPowerCapability>class4</RFPowerCapability>
      <RevisionLevel>GSM-phase2</RevisionLevel>
      <Flags>ES-IND</Flags>
    </MobileStationClassmark>
    <MobileIdentity>
      <IMSI>228017222531928</IMSI>
    </MobileIdentity>
  </Message>
</MM>
-----
2015-09-02_11:32:08.831455 <ybts-signalling:ALL> Added connection (0x7f75ac002870,3) [0xa26970]
2015-09-02_11:32:08.831463 <ybts-mm:ALL> Handling LocationUpdatingRequest conn=3: ident=IMSI/228017222531928 LAI=22801_fffe [0xa26d50]
2015-09-02_11:32:08.831468 <ybts-mm:ALL> Added UE (0x7f75ac002990) TMSI= IMSI=228017222531928 [0xa26d50]
2015-09-02_11:32:08.831473 <ybts-signalling:ALL> Connection 3 set UE (0x7f75ac002990) TMSI= IMSI=228017222531928 [0x7f75ac002870]
2015-09-02_11:32:08.831489 <ybts-signalling:INFO> Sending [0xa26970]
-----
Primitive: L3Message
Info: 0
Connection: 3

<MM>
  <Message type="IdentityRequest">
    <IdentityType>IMEI</IdentityType>
  </Message>
</MM>
-----
2015-09-02_11:32:09.301976 <ybts-signalling:INFO> Received [0xa26970]
-----
Primitive: PhysicalInfo
Info: 0
Connection: 3

<PhysicalInfo>TA=0 TE=-0.426 UpRSSI=-60 TxPwr=33 DnRSSIdBm=-78 time=1441186328.328</PhysicalInfo>
-----
2015-09-02_11:32:09.302020 <ybts-signalling:INFO> Received [0xa26970]
-----
Primitive: L3Message
Info: 0
Connection: 3

<MM>
  <SkipIndicator>0</SkipIndicator>
  <NSD>1</NSD>
  <Message type="IdentityResponse">
    <MobileIdentity>
      <IMEI>351869055911380</IMEI>
    </MobileIdentity>
  </Message>
</MM>
-----
2015-09-02_11:32:09.302075 <ybts:ALL> Started location updating thread for (0x7f75ac002990) TMSI= IMSI=228017222531928 [0x7f75ac0025b0]
2015-09-02_11:32:09.302210 <nib:INFO> Got user.register for imsi='228017222531928', tmsi=''
2015-09-02_11:32:09.302230 <nib:INFO> Searching imsi in subscribers.
2015-09-02_11:32:09.302328 <ybts:ALL> Location updating thread for (0x7f75ac002990) TMSI= IMSI=228017222531928 terminated [0x7f75ac0025b0]
2015-09-02_11:32:09.302336 <ybts-mm:ALL> UE (0x7f75ac002990) TMSI= IMSI=228017222531928 register failed [0xa26d50]
2015-09-02_11:32:09.302357 <ybts-signalling:INFO> Sending [0xa26970]
-----
Primitive: L3Message
Info: 0
Connection: 3

<MM>
  <Message type="LocationUpdatingReject">
    <RejectCause>location-area-not-allowed</RejectCause>
  </Message>
</MM>
-----
2015-09-02_11:32:09.302371 <ybts-signalling:ALL> Releasing connection (0x7f75ac002870,3) [0xa26970]
2015-09-02_11:32:09.302381 <ybts-signalling:INFO> Sending [0xa26970]
-----
Primitive: ConnRelease
Info: 0
Connection: 3
-----
Remote connection from 127.0.0.1:58863 to 127.0.0.1:5038
2015-09-02_11:32:40.003390 <ybts-signalling:ALL> Removing released connection 3 [0xa26970]
2015-09-02_11:32:40.003409 <ybts-mm:ALL> Removed UE (0x7f75ac002990): destroyed [0xa26d50]
2015-09-02_11:32:40.003413 <ybts:ALL> UE destroyed [0x7f75ac002990]
2015-09-02_11:32:41.203376 <RManager:INFO> Socket exception condition on 12
Closing connection to 127.0.0.1:58863
Remote connection from 127.0.0.1:58866 to 127.0.0.1:5038
2015-09-02_11:33:02.439973 <jingle:ALL> YJGEngineWorker stop running
2015-09-02_11:33:02.466890 <RManager:INFO> Socket exception condition on 12
Closing connection to 127.0.0.1:58866
2015-09-02_11:33:03.000100 <iaxengine:INFO> Status changed Listening -> Exiting [0x937270]
2015-09-02_11:33:03.000119 <iaxengine:ALL> Set terminate timeout=16500ms status=Exiting [0x937270]
2015-09-02_11:33:03.000129 <iax:INFO> Removed listener (0x937270) 'iaxengine' status='Exiting'
2015-09-02_11:33:03.002125 <iaxengine:ALL> Thread (0x9415a0) 'YIAXTrunking' terminated [0x937270]
2015-09-02_11:33:03.002411 <iaxengine:ALL> Thread (0x940bc0) 'YIAXListener' terminated [0x937270]
2015-09-02_11:33:03.002431 <iaxengine:ALL> Thread (0x940ea0) 'YIAXGetEvent' terminated [0x937270]
2015-09-02_11:33:03.002451 <iaxengine:ALL> Thread (0x9407d0) 'YIAXListener' terminated [0x937270]
2015-09-02_11:33:03.002473 <iaxengine:ALL> Thread (0x9410b0) 'YIAXGetEvent' terminated [0x937270]
2015-09-02_11:33:03.002511 <iaxengine:ALL> Thread (0x9412c0) 'YIAXGetEvent' terminated [0x937270]
2015-09-02_11:33:03.002541 <iaxengine:ALL> Thread (0x9409b0) 'YIAXListener' terminated [0x937270]
2015-09-02_11:33:03.005223 <iaxengine:ALL> Destroyed [0x937270]
2015-09-02_11:33:03.005256 <sip:ALL> Returning false from engine.stop handler
2015-09-02_11:33:03.005385 <mbts:ALL> Killing transceiver
MBTS exiting
2015-09-02_11:33:03.005406 <ybts:ALL> 'shutdown' command result:
-----
exiting...
-----
2015-09-02_11:33:03.005422 <ybts:ALL> Stopping ...
2015-09-02_11:33:03.007507 <ybts-signalling:ALL> Worker thread terminated [0xa26970]
2015-09-02_11:33:03.011542 <ybts-signalling:INFO> Stopped [0xa26970]
2015-09-02_11:33:03.012610 <ybts-media:ALL> Worker thread terminated [0xa26690]
2015-09-02_11:33:03.016646 <ybts-media:INFO> Stopped [0xa26690]
2015-09-02_11:33:03.016658 <ybts:INFO> Peer pid 4487 terminated
2015-09-02_11:33:03.016664 <ybts-command:INFO> Stopped [0xa26530]
2015-09-02_11:33:03.017648 <transceiver:ALL> Worker thread terminated [0xa26090]
2015-09-02_11:33:03.021757 <transceiver:INFO> Stopped [0xa26090]
2015-09-02_11:33:03.025716 <mbts:ALL> Worker thread terminated [0xa262d0]
2015-09-02_11:33:03.026854 <mbts:INFO> Stopped [0xa262d0]
2015-09-02_11:33:03.026866 <ybts:NOTE> State changed RadioUp -> Idle
Yate engine is shutting down with code 128
2015-09-02_11:33:03.027782 <jabber:ALL> JBPendingWorker(0) terminated [0x8196d0]
2015-09-02_11:33:03.027809 <jabber:ALL> Terminated 1 pending worker threads
2015-09-02_11:33:03.027853 <ALL> Rescanning handler list for 'engine.halt' [0x7ffe57890410] at priority 100
2015-09-02_11:33:03.027885 <ALL> Rescanning handler list for 'engine.halt' [0x7ffe57890410] at priority 100
2015-09-02_11:33:03.027894 <ALL> Handler list for 'engine.halt' [0x7ffe57890410] changed, skipping from 0x81a510 (100) to 0x81ae00 (100)
2015-09-02_11:33:03.027903 <ALL> Rescanning handler list for 'engine.halt' [0x7ffe57890410] at priority 100
2015-09-02_11:33:03.027936 <ALL> Rescanning handler list for 'engine.halt' [0x7ffe57890410] at priority 100
2015-09-02_11:33:03.027945 <ALL> Handler list for 'engine.halt' [0x7ffe57890410] changed, skipping from 0x8bc150 (100) to 0x8bd500 (100)
2015-09-02_11:33:03.033281 <ALL> Rescanning handler list for 'engine.halt' [0x7ffe57890410] at priority 100
2015-09-02_11:33:03.033323 <sip:ALL> Clearing udp transports reason=Exiting
2015-09-02_11:33:03.033335 <sip:INFO> Listener(UDP,'general') stop listening reason='Exiting' [0x955960]
2015-09-02_11:33:03.033339 <sip:ALL> Removed transport (0x955960,'general')
2015-09-02_11:33:03.033342 <sip:INFO> Reset default UDP transport
2015-09-02_11:33:03.038431 <sip:ALL> Transport(general) destroyed [0x955960]
2015-09-02_11:33:03.038478 <sip:ALL> YateSIPEndPoint::~YateSIPEndPoint() [0x951720]
2015-09-02_11:33:03.038523 <ALL> Rescanning handler list for 'engine.halt' [0x7ffe57890410] at priority 100
2015-09-02_11:33:03.038532 <ALL> Handler list for 'engine.halt' [0x7ffe57890410] changed, skipping from 0x9576f0 (100) to 0x959b40 (100)
2015-09-02_11:33:03.038559 <queuesnotify:ALL> Cancelling worker(s)
2015-09-02_11:33:03.042596 <queuesnotify:ALL> Worker(s) terminated
2015-09-02_11:33:03.042610 <ALL> Rescanning handler list for 'engine.halt' [0x7ffe57890410] at priority 100
2015-09-02_11:33:03.042623 <ALL> Handler list for 'engine.halt' [0x7ffe57890410] changed, skipping from 0x9618d0 (100) to 0x961b50 (100)
2015-09-02_11:33:03.042653 <ALL> Rescanning handler list for 'engine.halt' [0x7ffe57890410] at priority 100
2015-09-02_11:33:03.042659 <ALL> Handler list for 'engine.halt' [0x7ffe57890410] changed, skipping from 0x9656b0 (100) to 0x966a60 (100)
2015-09-02_11:33:03.042678 <ALL> Rescanning handler list for 'engine.halt' [0x7ffe57890410] at priority 100
2015-09-02_11:33:03.042684 <ALL> Handler list for 'engine.halt' [0x7ffe57890410] changed, skipping from 0x96d2d0 (100) to 0xa1ec60 (100)
2015-09-02_11:33:03.042706 <ALL> Rescanning handler list for 'engine.halt' [0x7ffe57890410] at priority 100
2015-09-02_11:33:03.042712 <ALL> Handler list for 'engine.halt' [0x7ffe57890410] changed, skipping from 0xa1fa30 (100) to 0xa204e0 (100)
2015-09-02_11:33:03.042984 <signalling:ALL> Engine stopped worker thread [0x967380]
2015-09-02_11:33:03.042993 <snmpagent:ALL> ::unload()
2015-09-02_11:33:03.058260 <ALL> Rescanning handler list for 'engine.halt' [0x7ffe57890410] at priority 100
2015-09-02_11:33:03.058298 <ALL> Handler list for 'engine.halt' [0x7ffe57890410] changed, skipping from 0xa22a60 (100) to 0xa23310 (100)
2015-09-02_11:33:03.058321 <ALL> Rescanning handler list for 'engine.halt' [0x7ffe57890410] at priority 100
2015-09-02_11:33:03.258444 >>> ThreadPrivate::killall()
2015-09-02_11:33:03.258472   <NOTE> Soft cancelling 5 running threads
2015-09-02_11:33:03.258476   <INFO> Stopping ThreadPrivate 'RManager Listener' [0x94acd0]
2015-09-02_11:33:03.258480   <INFO> Stopping ThreadPrivate 'MGCP Receive' [0x95e920]
2015-09-02_11:33:03.258484   <INFO> Stopping ThreadPrivate 'MGCP Process' [0x95eb90]
2015-09-02_11:33:03.258488   <INFO> Stopping ThreadPrivate 'Engine Worker' [0xacf8a0]
2015-09-02_11:33:03.258508   <INFO> Stopping ThreadPrivate 'RManager Connection' [0x7f7590000b30]
Closing connection to 127.0.0.1:58861
2015-09-02_11:33:03.268693 <<< ThreadPrivate::killall()

4
YateBTS / Re: USRP x310, no connection to transceiver
« on: September 02, 2015, 01:25:59 AM »
OMFG Marian you are my saver :D

5
YateBTS / Re: USRP x310, no connection to transceiver
« on: September 01, 2015, 07:14:22 AM »
Now it's saying that radio is on and then fail:
I think this is my error: EMERG 139867828958976 14:58:27.0 TRXManager.cpp:96:clockHandler: TRX clock interface timed out, assuming TRX is dead.

2015-09-01_14:58:12.081764 <mbts:NOTE> OpenBTS.cpp:145:startTransceiver: starting transceiver ./transceiver-uhd w/ 1 ARFCNs and Args:
linux; GNU C++ version 4.9.1; Boost_105500; UHD_003.007.003-0-unknown

Using internal clock reference
-- X300 initialization sequence...
-- Determining maximum frame size... 1472 bytes.
-- Setup basic communication...
-- Loading values from EEPROM...
2015-09-01_14:58:17.057699 <gsmtrx:NOTE> Received command 'READFACTORY sdrsn': transceiver not running
ALERT 139867830110016 14:58:17.0 TRXManager.cpp:603:getFactoryCalibration: READFACTORY failed with status 4
2015-09-01_14:58:17.057843 <mbts:WARN> TRXManager.cpp:603:getFactoryCalibration: READFACTORY failed with status 4
2015-09-01_14:58:17.057888 <gsmtrx:NOTE> Received command 'RXTUNE 900000': transceiver not running
ALERT 139867830110016 14:58:17.0 TRXManager.cpp:391:tune: RXTUNE failed with status 4
2015-09-01_14:58:17.057986 <mbts:WARN> TRXManager.cpp:391:tune: RXTUNE failed with status 4
2015-09-01_14:58:17.058000 <gsmtrx:NOTE> Received command 'SETTSC 2': transceiver not running
ALERT 139867830110016 14:58:17.0 TRXManager.cpp:474:setTSC: SETTSC failed with status 4
2015-09-01_14:58:17.058051 <mbts:WARN> TRXManager.cpp:474:setTSC: SETTSC failed with status 4
2015-09-01_14:58:17.058068 <gsmtrx:NOTE> Received command 'SETMAXDLY 2': transceiver not running
ALERT 139867830110016 14:58:17.0 TRXManager.cpp:512:setMaxDelay: SETMAXDLY failed with status 4
2015-09-01_14:58:17.058113 <mbts:WARN> TRXManager.cpp:512:setMaxDelay: SETMAXDLY failed with status 4
2015-09-01_14:58:17.058129 <gsmtrx:NOTE> Received command 'SETRXGAIN 0': transceiver not running
ALERT 139867830110016 14:58:17.0 TRXManager.cpp:523:setRxGain: SETRXGAIN failed with status 4
2015-09-01_14:58:17.058176 <mbts:WARN> TRXManager.cpp:523:setRxGain: SETRXGAIN failed with status 4
2015-09-01_14:58:17.058183 <gsmtrx:NOTE> Received command 'POWERON': transceiver not running
-- Setup RF frontend clocking...
2015-09-01_14:58:18.059297 <mbts:MILD> TRXManager.cpp:283:sendCommandPacket: TRX link timeout on attempt 1
2015-09-01_14:58:18.059326 <gsmtrx:NOTE> Received command 'POWERON': transceiver not running
-- Radio 1x clock:200
2015-09-01_14:58:19.060373 <mbts:MILD> TRXManager.cpp:283:sendCommandPacket: TRX link timeout on attempt 2
2015-09-01_14:58:19.060404 <gsmtrx:NOTE> Received command 'POWERON': transceiver not running
-- Initialize Radio control...
-- Performing register loopback test... pass
-- Sync DAC's.
-- Performing register loopback test... pass
-- Sync DAC's.
-- Initializing clock and PPS references...
-- References initialized to internal sources
ALERT 139902730393408 14:58:19.3 UHDDevice.cpp:520:parse_dev_type: Choose X310
2015-09-01_14:58:19.330539 <transceiver:WARN> UHDDevice.cpp:520:parse_dev_type: Choose X310
Starting transceiver
2015-09-01_14:58:20.061507 <mbts:MILD> TRXManager.cpp:283:sendCommandPacket: TRX link timeout on attempt 3
2015-09-01_14:58:20.061535 <gsmtrx:NOTE> Received command 'POWERON': transceiver not running
2015-09-01_14:58:21.062619 <mbts:MILD> TRXManager.cpp:283:sendCommandPacket: TRX link timeout on attempt 4
2015-09-01_14:58:21.062653 <gsmtrx:NOTE> Received command 'POWERON': transceiver not running
ALERT 139867830110016 14:58:22.0 TRXManager.cpp:444:powerOn: POWERON failed with status -1
2015-09-01_14:58:22.063725 <mbts:MILD> TRXManager.cpp:283:sendCommandPacket: TRX link timeout on attempt 5
2015-09-01_14:58:22.063746 <mbts:NOTE> TRXManager.cpp:293:sendCommandPacket: lost control link to transceiver
2015-09-01_14:58:22.063751 <mbts:WARN> TRXManager.cpp:444:powerOn: POWERON failed with status -1
2015-09-01_14:58:22.063785 <gsmtrx:NOTE> Received command 'SETPOWER 40': transceiver not running
ALERT 139867830110016 14:58:22.0 TRXManager.cpp:462:setPower: SETPOWER failed with status 4
2015-09-01_14:58:22.063882 <mbts:WARN> TRXManager.cpp:462:setPower: SETPOWER failed with status 4
2015-09-01_14:58:22.063897 <gsmtrx:NOTE> Received command 'SETSLOT 0 5': transceiver not running
ALERT 139867830110016 14:58:22.0 TRXManager.cpp:502:setSlot: SETSLOT failed with status 4
2015-09-01_14:58:22.063971 <mbts:WARN> TRXManager.cpp:502:setSlot: SETSLOT failed with status 4
2015-09-01_14:58:22.064018 <gsmtrx:NOTE> Received command 'NOHANDOVER 0': transceiver not running
2015-09-01_14:58:22.064082 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.064095 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.064140 <gsmtrx:NOTE> Received command 'NOHANDOVER 0': transceiver not running
2015-09-01_14:58:22.064212 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.064225 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.064278 <gsmtrx:NOTE> Received command 'NOHANDOVER 0': transceiver not running
2015-09-01_14:58:22.064336 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.064350 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.064435 <gsmtrx:NOTE> Received command 'NOHANDOVER 0': transceiver not running
2015-09-01_14:58:22.064490 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.064511 <gsmtrx:NOTE> Received command 'NOHANDOVER 0': transceiver not running
2015-09-01_14:58:22.064521 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.064541 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.064550 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.064596 <gsmtrx:NOTE> Received command 'NOHANDOVER 0': transceiver not running
2015-09-01_14:58:22.064631 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.064642 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.064830 <gsmtrx:NOTE> Received command 'NOHANDOVER 0': transceiver not running
2015-09-01_14:58:22.064865 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.064878 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.064927 <gsmtrx:NOTE> Received command 'NOHANDOVER 0': transceiver not running
2015-09-01_14:58:22.064953 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.064965 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.065030 <gsmtrx:NOTE> Received command 'NOHANDOVER 0': transceiver not running
2015-09-01_14:58:22.065052 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.065064 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.065108 <gsmtrx:NOTE> Received command 'NOHANDOVER 0': transceiver not running
2015-09-01_14:58:22.065129 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.065140 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.065200 <gsmtrx:NOTE> Received command 'NOHANDOVER 0': transceiver not running
2015-09-01_14:58:22.065221 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.065233 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.065276 <gsmtrx:NOTE> Received command 'NOHANDOVER 0': transceiver not running
2015-09-01_14:58:22.065298 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.065309 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.065370 <gsmtrx:NOTE> Received command 'NOHANDOVER 0': transceiver not running
2015-09-01_14:58:22.065392 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.065403 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.065444 <gsmtrx:NOTE> Received command 'NOHANDOVER 0': transceiver not running
2015-09-01_14:58:22.065465 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.065476 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.065541 <mbts:NOTE> GSMConfig.cpp:532:createCombinationI: Configuring combination I on C0T1
2015-09-01_14:58:22.065551 <gsmtrx:NOTE> Received command 'SETSLOT 1 1': transceiver not running
ALERT 139867830110016 14:58:22.0 TRXManager.cpp:502:setSlot: SETSLOT failed with status 4
2015-09-01_14:58:22.065587 <mbts:WARN> TRXManager.cpp:502:setSlot: SETSLOT failed with status 4
2015-09-01_14:58:22.065671 <gsmtrx:NOTE> Received command 'NOHANDOVER 1': transceiver not running
2015-09-01_14:58:22.065694 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.065705 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.065767 <gsmtrx:NOTE> Received command 'NOHANDOVER 1': transceiver not running
2015-09-01_14:58:22.065805 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.065816 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.065882 <mbts:NOTE> GSMConfig.cpp:532:createCombinationI: Configuring combination I on C0T2
2015-09-01_14:58:22.065900 <gsmtrx:NOTE> Received command 'SETSLOT 2 1': transceiver not running
ALERT 139867830110016 14:58:22.0 TRXManager.cpp:502:setSlot: SETSLOT failed with status 4
2015-09-01_14:58:22.065942 <mbts:WARN> TRXManager.cpp:502:setSlot: SETSLOT failed with status 4
2015-09-01_14:58:22.066033 <gsmtrx:NOTE> Received command 'NOHANDOVER 2': transceiver not running
2015-09-01_14:58:22.066067 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.066077 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.066134 <gsmtrx:NOTE> Received command 'NOHANDOVER 2': transceiver not running
2015-09-01_14:58:22.066165 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.066174 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.066218 <mbts:NOTE> GSMConfig.cpp:532:createCombinationI: Configuring combination I on C0T3
2015-09-01_14:58:22.066229 <gsmtrx:NOTE> Received command 'SETSLOT 3 1': transceiver not running
ALERT 139867830110016 14:58:22.0 TRXManager.cpp:502:setSlot: SETSLOT failed with status 4
2015-09-01_14:58:22.066271 <mbts:WARN> TRXManager.cpp:502:setSlot: SETSLOT failed with status 4
2015-09-01_14:58:22.066357 <gsmtrx:NOTE> Received command 'NOHANDOVER 3': transceiver not running
2015-09-01_14:58:22.066381 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.066392 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.066441 <gsmtrx:NOTE> Received command 'NOHANDOVER 3': transceiver not running
2015-09-01_14:58:22.066463 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.066473 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.066515 <mbts:NOTE> GSMConfig.cpp:532:createCombinationI: Configuring combination I on C0T4
2015-09-01_14:58:22.066523 <gsmtrx:NOTE> Received command 'SETSLOT 4 1': transceiver not running
ALERT 139867830110016 14:58:22.0 TRXManager.cpp:502:setSlot: SETSLOT failed with status 4
2015-09-01_14:58:22.066554 <mbts:WARN> TRXManager.cpp:502:setSlot: SETSLOT failed with status 4
2015-09-01_14:58:22.066628 <gsmtrx:NOTE> Received command 'NOHANDOVER 4': transceiver not running
2015-09-01_14:58:22.066649 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.066659 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.066725 <gsmtrx:NOTE> Received command 'NOHANDOVER 4': transceiver not running
2015-09-01_14:58:22.066746 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.066757 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.066810 <mbts:NOTE> GSMConfig.cpp:532:createCombinationI: Configuring combination I on C0T5
2015-09-01_14:58:22.066820 <gsmtrx:NOTE> Received command 'SETSLOT 5 1': transceiver not running
ALERT 139867830110016 14:58:22.0 TRXManager.cpp:502:setSlot: SETSLOT failed with status 4
2015-09-01_14:58:22.066848 <mbts:WARN> TRXManager.cpp:502:setSlot: SETSLOT failed with status 4
2015-09-01_14:58:22.066933 <gsmtrx:NOTE> Received command 'NOHANDOVER 5': transceiver not running
2015-09-01_14:58:22.066956 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.066967 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.067016 <gsmtrx:NOTE> Received command 'NOHANDOVER 5': transceiver not running
2015-09-01_14:58:22.067037 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.067047 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.067092 <mbts:NOTE> GSMConfig.cpp:532:createCombinationI: Configuring combination I on C0T6
2015-09-01_14:58:22.067101 <gsmtrx:NOTE> Received command 'SETSLOT 6 1': transceiver not running
ALERT 139867830110016 14:58:22.0 TRXManager.cpp:502:setSlot: SETSLOT failed with status 4
2015-09-01_14:58:22.067140 <mbts:WARN> TRXManager.cpp:502:setSlot: SETSLOT failed with status 4
2015-09-01_14:58:22.067224 <gsmtrx:NOTE> Received command 'NOHANDOVER 6': transceiver not running
2015-09-01_14:58:22.067247 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.067258 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.067307 <gsmtrx:NOTE> Received command 'NOHANDOVER 6': transceiver not running
2015-09-01_14:58:22.067329 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.067342 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.067372 <mbts:NOTE> GSMConfig.cpp:532:createCombinationI: Configuring combination I on C0T7
2015-09-01_14:58:22.067390 <gsmtrx:NOTE> Received command 'SETSLOT 7 1': transceiver not running
ALERT 139867830110016 14:58:22.0 TRXManager.cpp:502:setSlot: SETSLOT failed with status 4
2015-09-01_14:58:22.067419 <mbts:WARN> TRXManager.cpp:502:setSlot: SETSLOT failed with status 4
2015-09-01_14:58:22.067492 <gsmtrx:NOTE> Received command 'NOHANDOVER 7': transceiver not running
2015-09-01_14:58:22.067512 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.067523 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.067552 <gsmtrx:NOTE> Received command 'NOHANDOVER 7': transceiver not running
2015-09-01_14:58:22.067571 <mbts:MILD> TRXManager.cpp:547:clearHandover: NOHANDOVER failed with status 4
2015-09-01_14:58:22.067581 <mbts:MILD> GSML1FEC.cpp:474:handoverPending: handover clear failed
2015-09-01_14:58:22.067613 <gsmtrx:NOTE> Received command 'SETPOWER 40': transceiver not running
ALERT 139867830110016 14:58:22.0 TRXManager.cpp:462:setPower: SETPOWER failed with status 4
2015-09-01_14:58:22.067641 <mbts:WARN> TRXManager.cpp:462:setPower: SETPOWER failed with status 4
MBTS ready
2015-09-01_14:58:22.067697 <ybts-signalling:INFO> Received [0xc68dd0]
-----
Primitive: RadioReady
Info: 0
-----
2015-09-01_14:58:22.067704 <ybts:NOTE> State changed Running -> RadioUp
EMERG 139867828958976 14:58:27.0 TRXManager.cpp:96:clockHandler: TRX clock interface timed out, assuming TRX is dead.
2015-09-01_14:58:27.066954 <mbts:GOON> TRXManager.cpp:96:clockHandler: TRX clock interface timed out, assuming TRX is dead.
2015-09-01_14:58:30.995930 <ybts:NOTE> Peer pid 17601 vanished
2015-09-01_14:58:30.995955 <ybts:ALL> Restart scheduled in 1ms [0x7fe46ea39e80]
2015-09-01_14:58:30.995960 <ybts:ALL> Scheduled stop in 0ms
Received shutdown signal
Shutting down transceiver...
2015-09-01_14:58:32.209183 <iaxengine:INFO> Status changed Listening -> Exiting [0xb6e720]
2015-09-01_14:58:32.209200 <iaxengine:ALL> Set terminate timeout=16500ms status=Exiting [0xb6e720]
2015-09-01_14:58:32.209209 <iax:INFO> Removed listener (0xb6e720) 'iaxengine' status='Exiting'
2015-09-01_14:58:32.209503 <iaxengine:ALL> Thread (0xb78a50) 'YIAXTrunking' terminated [0xb6e720]
2015-09-01_14:58:32.211285 <iaxengine:ALL> Thread (0xb78560) 'YIAXGetEvent' terminated [0xb6e720]
2015-09-01_14:58:32.211308 <jingle:ALL> YJGEngineWorker stop running
2015-09-01_14:58:32.211333 <iaxengine:ALL> Thread (0xb78350) 'YIAXGetEvent' terminated [0xb6e720]
2015-09-01_14:58:32.211373 <iaxengine:ALL> Thread (0xb78070) 'YIAXListener' terminated [0xb6e720]
2015-09-01_14:58:32.211416 <iaxengine:ALL> Thread (0xb77c80) 'YIAXListener' terminated [0xb6e720]
2015-09-01_14:58:32.211437 <iaxengine:ALL> Thread (0xb78770) 'YIAXGetEvent' terminated [0xb6e720]
2015-09-01_14:58:32.211458 <iaxengine:ALL> Thread (0xb77e60) 'YIAXListener' terminated [0xb6e720]
2015-09-01_14:58:32.214336 <iaxengine:ALL> Destroyed [0xb6e720]
2015-09-01_14:58:32.214398 <sip:ALL> Returning false from engine.stop handler
Yate engine is shutting down with code 0
2015-09-01_14:58:32.216360 <jabber:ALL> JBPendingWorker(0) terminated [0xa4efb0]
2015-09-01_14:58:32.216389 <jabber:ALL> Terminated 1 pending worker threads
2015-09-01_14:58:32.216419 <ALL> Rescanning handler list for 'engine.halt' [0x7ffc37afabb0] at priority 100
2015-09-01_14:58:32.216442 <ALL> Rescanning handler list for 'engine.halt' [0x7ffc37afabb0] at priority 100
2015-09-01_14:58:32.216447 <ALL> Handler list for 'engine.halt' [0x7ffc37afabb0] changed, skipping from 0xa4fdf0 (100) to 0xa506e0 (100)
2015-09-01_14:58:32.216457 <ALL> Rescanning handler list for 'engine.halt' [0x7ffc37afabb0] at priority 100
2015-09-01_14:58:32.216482 <ALL> Rescanning handler list for 'engine.halt' [0x7ffc37afabb0] at priority 100
2015-09-01_14:58:32.216487 <ALL> Handler list for 'engine.halt' [0x7ffc37afabb0] changed, skipping from 0xb08cc0 (100) to 0xb09670 (100)
2015-09-01_14:58:32.221843 <ALL> Rescanning handler list for 'engine.halt' [0x7ffc37afabb0] at priority 100
2015-09-01_14:58:32.221873 <sip:ALL> Clearing udp transports reason=Exiting
2015-09-01_14:58:32.221886 <sip:INFO> Listener(UDP,'general') stop listening reason='Exiting' [0xb8ccf0]
2015-09-01_14:58:32.221889 <sip:ALL> Removed transport (0xb8ccf0,'general')
2015-09-01_14:58:32.221893 <sip:INFO> Reset default UDP transport
2015-09-01_14:58:32.226980 <sip:ALL> Transport(general) destroyed [0xb8ccf0]
2015-09-01_14:58:32.227033 <sip:ALL> YateSIPEndPoint::~YateSIPEndPoint() [0xb88ab0]
2015-09-01_14:58:32.227078 <ALL> Rescanning handler list for 'engine.halt' [0x7ffc37afabb0] at priority 100
2015-09-01_14:58:32.227085 <ALL> Handler list for 'engine.halt' [0x7ffc37afabb0] changed, skipping from 0xb8ea80 (100) to 0xb93f00 (100)
2015-09-01_14:58:32.227092 <gsmtrx:INFO> Module state changed Waiting -> Idle
2015-09-01_14:58:32.231696 <gsmtrx:ALL> 'control' thread terminated

6
YateBTS / Re: USRP x310, no connection to transceiver
« on: September 01, 2015, 06:43:02 AM »
Yes you definitely need to patch.
Here is mine:

--- UHDDevice.cpp   2014-04-16 11:56:39.000000000 +0200
+++ UHDDevice.cpp   2015-08-31 18:03:21.494289230 +0200
@@ -34,6 +34,7 @@
 
 #define B2XX_CLK_RT      52e6
 #define B2XX_BASE_RT     GSMRATE
+#define X3XX_CLK_RT      104e6
 #define B100_BASE_RT     400000
 #define USRP2_BASE_RT    390625
 #define TX_AMPL          0.3
@@ -44,6 +45,7 @@
    USRP2,
    B100,
    B2XX,
+   X3XX,
    UMTRX,
    NUM_USRP_TYPES,
 };
@@ -73,6 +75,8 @@
    { B100,  4, 7.9307e-5 },
    { B2XX,  1, 9.9692e-5 },
    { B2XX,  4, 6.9248e-5 },
+   { X3XX,  1, 1.5360e-4 },
+   { X3XX,  4, 1.1264e-4 },
    { UMTRX, 1, 9.9692e-5 },
    { UMTRX, 4, 7.3846e-5 },
 };
@@ -108,6 +112,8 @@
    switch (type) {
    case USRP2:
       return USRP2_BASE_RT * sps;
+   case X3XX:
+      return USRP2_BASE_RT * sps;
    case B100:
       return B100_BASE_RT * sps;
    case B2XX:
@@ -474,7 +480,7 @@
 {
    std::string mboard_str, dev_str;
    uhd::property_tree::sptr prop_tree;
-   size_t usrp1_str, usrp2_str, b100_str, b200_str, b210_str, umtrx_str;
+   size_t usrp1_str, usrp2_str, b100_str, b200_str, b210_str, umtrx_str, x300_str, x310_str;
 
    prop_tree = usrp_dev->get_device()->get_tree();
    dev_str = prop_tree->access<std::string>("/name").get();
@@ -486,6 +492,8 @@
    b200_str = mboard_str.find("B200");
    b210_str = mboard_str.find("B210");
    umtrx_str = dev_str.find("UmTRX");
+   x300_str = mboard_str.find("X300");
+   x310_str = mboard_str.find("X310");
 
    if (usrp1_str != std::string::npos) {
       LOG(ALERT) << "USRP1 is not supported using the UHD driver";
@@ -504,6 +512,12 @@
       dev_type = B2XX;
    } else if (b210_str != std::string::npos) {
       dev_type = B2XX;
+   } else if (x300_str != std::string::npos) {
+       dev_type = X3XX;
+       LOG(ALERT) << "Chooose X300";
+   } else if (x310_str != std::string::npos) {
+      dev_type = X3XX;
+      LOG(ALERT) << "Choose X310";
    } else if (usrp2_str != std::string::npos) {
       dev_type = USRP2;
    } else if (umtrx_str != std::string::npos) {
@@ -583,6 +597,7 @@
    case B100:
       return RESAMP_64M;
    case USRP2:
+   case X3XX:
       return RESAMP_100M;
    }

7
YateBTS / Re: USRP x310, no connection to transceiver
« on: August 31, 2015, 09:48:31 AM »
Hey,

In fact it's not working...

They didn't know my version of the uhd I think.

UHDDevice.cpp:512:parse_dev_type: Unknown UHD device type X-Series Device
I think I will need to patch stuff, will see...

8
YateBTS / Re: USRP x310, no connection to transceiver
« on: August 31, 2015, 08:35:51 AM »
Oh ok.
It's weird because in the documentation it's written that with ./transceiver-uhd it must work. I'm wondering why this transceiver is not available in the latest version...
Thanks anyway I will try like that.

9
YateBTS / USRP x310, no connection to transceiver
« on: August 31, 2015, 08:12:19 AM »
Hi,

I'm trying to use USRP X310 from ettus to work with yateBTS.
I downloaded latest git version of yateBTS.
I added the PATH=./transceiver-uhd to my ybts.conf.
Is there anything more to do within configuration and compilation of yateBTS to support uhd device ?
Like openBTS ./configure --with-uhd or something ?
uhd_usrp_probe is working and I have added a rule for 192.168.10.0 in my iptables.



Here is the log of the fail:

2015-08-31_16:06:41.008295 <ybts:NOTE> State changed WaitHandshake -> Running
2015-08-31_16:06:41.008309 <gsmtrx:GOON> Failed to create radio interface: Message not handled
2015-08-31_16:06:41.008320 <ybts-signalling:INFO> Sending [0xa42c30]
-----
Primitive: Handshake
Info: 0
-----
ALERT 139678315734848 16:06:41.0 TRXManager.cpp:126:sendCommand: RESET failed with status 2
2015-08-31_16:06:41.008381 <mbts:WARN> TRXManager.cpp:126:sendCommand: RESET failed with status 2
ALERT 139678315734848 16:06:41.0 OpenBTS.cpp:250:main: Failed to reset transceiver
2015-08-31_16:06:41.008416 <mbts:WARN> OpenBTS.cpp:250:main: Failed to reset transceiver

Pages: [1]