Messages

1

YateBTS / YateBTS not starting

« on: October 01, 2015, 10:55:21 AM »

I installed YateBTS and started it with sudo yate -sd -vvvvv -l /var/log/yate1.log . YateBTS is not starting and logs give the following message. In one of the forum I read that setting
[modules]
gsmtrx.yate=no  in yates.bts will help but that too has not . How should I further debug this ?


2015-10-01_18:27:20.011182 <javascript:INFO> Parsed 'nib' script: /usr/local/share/yate/scripts/nib.js
2015-10-01_18:27:20.015418 <nib:CONF> Please configure country code. See subscribers.conf or use the NIB web interface
2015-10-01_18:27:20.016739 <NOTE> Failed to open config file '/usr/local/etc/yate/tmsidata.conf', using defaults (2: No such file or directory)
2015-10-01_18:27:20.017229 <nib:INFO> Finished reading saved registered subscribers. Found 0 registered_subscribers.
2015-10-01_18:27:20.017785 <nib:INFO> Checked that only NIB is enabled.
2015-10-01_18:27:20.017913 <ALL> Rescanning handler list for 'engine.start' [0x7ffe88acae80] at priority 100
Yate engine is initialized and starting up on yatebts-HP-15-Notebook-PC
2015-10-01_18:27:20.018022 <INFO> Creating first message dispatching thread
2015-10-01_18:27:20.825671 <cpuload:NOTE> Updating CPU core number from 1 to 4
2015-10-01_18:27:20.931508 <gsmtrx:NOTE> Received command 'POWEROFF': transceiver not running
2015-10-01_18:27:20.932175 <mbts:MILD> TRXManager.cpp:283:sendCommandPacket: TRX link timeout on attempt 1
2015-10-01_18:27:21.932148 <mbts:MILD> TRXManager.cpp:283:sendCommandPacket: TRX link timeout on attempt 2
2015-10-01_18:27:21.932363 <gsmtrx:NOTE> Received command 'POWEROFF': transceiver not running
2015-10-01_18:27:22.933201 <mbts:MILD> TRXManager.cpp:283:sendCommandPacket: TRX link timeout on attempt 3
2015-10-01_18:27:22.933448 <gsmtrx:NOTE> Received command 'POWEROFF': transceiver not running
2015-10-01_18:27:23.934941 <mbts:MILD> TRXManager.cpp:283:sendCommandPacket: TRX link timeout on attempt 4
2015-10-01_18:27:23.935281 <gsmtrx:NOTE> Received command 'POWEROFF': transceiver not running
ALERT 140032046630784 18:27:24.9 TRXManager.cpp:432:powerOff: POWEROFF failed with status -1
2015-10-01_18:27:24.936668 <mbts:MILD> TRXManager.cpp:283:sendCommandPacket: TRX link timeout on attempt 5
2015-10-01_18:27:24.936815 <mbts:NOTE> TRXManager.cpp:293:sendCommandPacket: lost control link to transceiver
2015-10-01_18:27:24.936908 <mbts:WARN> TRXManager.cpp:432:powerOff: POWEROFF failed with status -1
5700/udp:            31843
2015-10-01_18:27:25.122461 <mbts:NOTE> OpenBTS.cpp:145:startTransceiver: starting transceiver ./transceiver-bladerf w/ 1 ARFCNs and Args:
2015-10-01_18:27:25.287374 <transceiver:NOTE> bladeRFDevice.cpp:110:open: Opened bladeRF serial=bed68a2046b339db44ea13c29695353f firmware version 1.8.0 (1.8.0)
2015-10-01_18:27:25.498151 <transceiver:NOTE> Transceiver.cpp:68:Transceiver: running 1 ARFCNs with oversampling 4
Starting transceiver
2015-10-01_18:27:29.937522 <gsmtrx:NOTE> Received command 'READFACTORY sdrsn': transceiver not running
ALERT 140032046630784 18:27:29.9 TRXManager.cpp:603:getFactoryCalibration: READFACTORY failed with status 4