Messages

1

YateBTS / Manage sim error

« on: January 07, 2017, 08:33:46 PM »

I have pysim installed and Yates running, but it gives me an error about setting the path of pysim in some config file.. what is the location of this config file?

2

YateBTS / Re: How do i clear the online subscribers list

« on: January 05, 2017, 08:32:02 PM »

I mean yes I refreshed the browser, but the list seems to only update   while it's running.  Meaning, if I disconnect a device from the network  while Yates is running, it will eventually show that device as gone. But if I shut down Yate with two devices connected then restart it with those devices turned off. It still shows those devices

3

YateBTS / Re: How do i clear the online subscribers list

« on: January 03, 2017, 09:01:14 AM »

ok i figured that, but online subscribers doesn't seem to refresh when a device goes offline it remains in the online subscribers tab.. how do i force a refresh of that list.

4

YateBTS / Re: Call logs empty?

« on: January 03, 2017, 08:59:56 AM »

I will look into this when i get home..thanks..  In addition i have installed pysim and was trying to get the manage sims take to work, but it says i need to install pysim and create a config.php file that points to pysim, it doesn't however say where i am suppose to put the config.php file.. could you help with that as well.

5

YateBTS / How do i clear the online subscribers list

« on: December 29, 2016, 12:46:29 PM »

I have two phones working with my yateBTS, but even when i disconnect them or even shut them down completely, they still show up in the "online subscribers"

I am wondering if i need to set an expiration and if so how?  or how i can manually clear that list.

Also i am using regEx ".*" for my subscribers list, but even when a phone registers it doesn't show up in the list subscribers.  is that a bug or intentional?

thanks in advance

6

YateBTS / Call logs empty?

« on: December 28, 2016, 07:46:44 PM »

I successfully set up a gsm850 network and manually connected two phones to the network.. both phones successfully made/received calls and text messages from each other, but no calls are showing up in the call log.

Can someone point me to a tutorial on getting call logs and other network activity?

7

Yate users hangout place / Call logs empty?

« on: December 28, 2016, 03:08:28 PM »

I set up my yatebts and got two phones to connect. I called each phone from the other successfully, but when I went to call logs, they were empty..  can someone help me understand how to get call logs to work..

8

Yate users hangout place / BladeRF Yate BTS issue

« on: December 25, 2016, 10:09:55 AM »

I know there have been other posts about this, but they are all seemingly old and none seem to openly fix this issue i am having..

I recently got a bladeRF and was trying to set up yatebts with it on a raspberry pi.  i have followed the instructions at https://evilsocket.net/2016/03/31/how-to-build-your-own-rogue-gsm-bts-for-fun-and-profit/ to a T but when i run yate bts i get a transceiver failed to reset error.. i have since tried playing around with the firmware version and rbf file but to no avail.. can anyone please help me understand what is wrong and how i can fix it..

Code: [Select]

bladeRF> info

  Serial #:                 77411c270d64eafeff1296aca7c1e932
  VCTCXO DAC calibration:   0x9390
  FPGA size:                40 KLE
  FPGA loaded:              yes
  USB bus:                  1
  USB address:              4
  USB speed:                Hi-Speed
  Backend:                  libusb
  Instance:                 0

bladeRF> version

  bladeRF-cli version:        0.11.1-git
  libbladeRF version:         0.16.2-git

  Firmware version:           1.9.1
  FPGA version:               0.6.0

bladeRF>

when i run 'sudo yate -s'  i get the following

Code: [Select]

Release 5.0.1 formal build date Dec 15 2016 rev
Starting MBTS...
2016-12-20_01:20:46.074316 <gsmtrx:GOON> Failed to create radio interface: Message not handled
ALERT 1996357632 01:20:46.0 TRXManager.cpp:135:sendCommand: RESET failed with status 2
2016-12-20_01:20:46.075507 <mbts:WARN> TRXManager.cpp:135:sendCommand: RESET failed with status 2
ALERT 1996357632 01:20:46.0 OpenBTS.cpp:250:main: Failed to reset transceiver
2016-12-20_01:20:46.076168 <mbts:WARN> OpenBTS.cpp:250:main: Failed to reset transceiver
2016-12-20_01:20:52.003557 <ybts:GOON> Restart index reached maximum value 10. Exiting ...
Yate engine is shutting down with code 125
2016-12-20_01:20:53.041796 <WARN> Failed to save config file '/usr/local/etc/yate/snmp_data.conf' (13: Permission denied)
Unloaded module Users Management


9

YateBTS / Re: Tranceiver error: YateBTS + bladeRF + Raspbery Pi 3

« on: December 25, 2016, 09:15:19 AM »

Hey strcpy, very helpful article. Was able to get the transceiver working. Thanks

Would like to get GSM/3g USB dongle working via this yate-datacard module:
https://github.com/mbloody/yate-datacard

Anyone managed to get this working?

I am 120 days late to this thread, but new to yateBTS and the bladeRF.. i am having the same problem you were having and was hoping you could tell us how you got the transceiver working..

Code: [Select]

bladeRF> version

  bladeRF-cli version:        1.4.0-git-unknown
  libbladeRF version:         1.7.2-git-unknown

  Firmware version:           1.9.1
  FPGA version:               0.5.0

bladeRF>


10

Yate users hangout place / Re: Network wide SMS message?

« on: December 19, 2016, 03:47:26 PM »

where do i find that nib.js

11

Yate users hangout place / Network wide SMS message?

« on: December 18, 2016, 03:56:05 PM »

I'm researching building a small local GSM network for my friends and I to play around on.. I'm wondering if there is a way to send a message from Yate BTS to all devices connected?  Very new to Yate.. still waiting for my bladerf to come and basically looking for tutorials on the nib interface.

Total noob