Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - nurwalid

Pages: [1] 2
YateBTS / Re: Registration failed on network 2
« on: July 20, 2015, 06:42:16 AM »
Nurwalid: Dburgess is the guy who wrote openbts :)
Try to make a full clean up and get the latest yatebts.


yes , of course I know , who knows a great man like dburgess ? :)

a pride can communicate with him , I hope that students like me can become someone like him later .

diana thanks , I 'll try again . Where should I install ? from src or tar.gz ?

YateBTS / Re: Registration failed on network 2
« on: July 13, 2015, 01:27:21 AM »
From you log, this looks like a hardware problem with the radio or with the USB cable.

Thanks for your respon dude..
Really? Because With openbts work without issues..

For my configuration,  no problem there?

YateBTS / Re: Registration failed on network 2
« on: July 10, 2015, 11:58:44 PM »
and this for new log

YateBTS / Re: Registration failed on network 2
« on: July 10, 2015, 11:44:46 PM »
this is my config at /usr/local/etc/yate , what there is wrong ?

YateBTS / Re: Registration failed on network 2
« on: June 26, 2015, 01:57:19 AM »
Nurwalid -

Take a look at the section on RACH activity on

If you enable RACH logging and try to register, do you see RACH bursts?

If you remove and replace the handset battery between tests does that change the behavior or the RACH activity?


Hi David, thank's for you answer

i don't know RACH logging are enable, i think it automatic on if i start yatebts.
and i don't see RACH busrt on my log.
how i know if RACH logging are enable? and how to enable it? on i don't see how to enable it.


YateBTS / Re: Registration failed on network 2
« on: June 09, 2015, 11:24:37 AM »
this is the log..

YateBTS / Registration failed on network 2
« on: June 08, 2015, 08:15:11 PM »
Hi everyone, can you help me for open registration?

I can detect GSM signal from my phone but always fail to register.

i set ubuntu 14.04 LTS for my Operating system
i set newest version yate and yatebts from svn
i set nib.js

this my config,

yate.conf = in [general] i set extrapath=bts
ybts.conf = in [transceiver] i set ./transceiver-uhd for usrp B210, in [ybts] i set mode=nib
javascript.conf = in [general] i set routing=welcome.js
extmodule.conf = in [scripts] i set

-in subscribers  i set regexp to .*
-in outgoing i set SIP
username : yatebts
pass : yatebts
server :
for other i set default

-after that, i do uhd_usrp_probe to usrp B210
-then yate -sd -vvvvv -l /var/log/yate.log
-then telnet 5038
(in telnet)
mbts rxgain 75
debug mbts on
debug transceiver on
debug sip on
debug on
sniffer on
output on
color on

and i see detecting signal 00101 from my phone, but can't connect to that network now try again later.  always like that.
and from telnet log, i don't see my IMSI try to connect to network

whether this configurations already correct?
what should i do?

YateBTS / Re: Change the SMS Welcome Message
« on: June 07, 2015, 11:32:27 PM »
cool, can you register on network? and can you sms and call ?

i installed yatebts with USRP N210 and B210, but can't register on network,

can i know your configuration dude? and what your phone type ?

YateBTS / Re: Registration failed on gsm network
« on: June 07, 2015, 11:26:44 PM »
hi oana..

i choose regexp .*
subscribers.conf availible on /usr/etc/local/yate/

and i still failed for register on network.

what should i do now?


YateBTS / Re: Registration failed on gsm network
« on: May 15, 2015, 11:19:25 AM »
Yes sure, i mean subscribers.conf not subscriber.conf

I will try it later.. If my radio board back here.

Thx oana, i will post my result with your solution soon.

YateBTS / Re: Registration failed on gsm network
« on: May 14, 2015, 07:51:50 PM »

What version of yatebts are you using? In older versions, nib script used subscribers.js file, not subscribers.conf

I'm using new version of yatebts and yate from svn

So, nib acript used subscriber.conf?

YateBTS / Re: Registration failed on gsm network
« on: May 14, 2015, 05:41:53 AM »
It looks like you haven't configured your NIB to accept registrations from that IMSI.

You can allow registration from subscribers.conf or through the NIB web interface. You can also put a regexp to allow IMSIs that match that regexp to register (but please be careful not to accept everything, as it could possibly disrupt phones around).

i have configured NIB , BTS configuration , outgoing (SIP)
on subscriber : i'm try using regexp (^001 and .*) .  i can't input subcriber manual because i don't know to have Ki (card secret) , country code 410 (indonesia)

on BTS config : RadioBand (EGSM900), RadioCO (50: 945 downlink and 900 uplink)

I 'm doing a school assignment by using yatebts at locations not reachable by the BTS . at this location no one has phones (rural area)

what should i do now oana?

YateBTS / Re: Registration failed on gsm network
« on: May 13, 2015, 09:45:59 AM »

please attach a log from YateBTS corresponding to this registration attempt.

You can find information about logging and debugging for YateBTS here:

sorry i'm not attach full log, a log is too large.

yes i have been followed that command , but i still can't register on test network

YateBTS / Registration failed on gsm network
« on: May 13, 2015, 04:58:59 AM »

00101 network has been detected by my phone, but registration always fail like this picture

what should i do for this problem?

Linux / Re: GSM network is not detected by mobile phone
« on: April 27, 2015, 09:38:00 AM »
i have done with debug on, max debug per mbts , sniffer on and etc.

My phone detects the signal 00101 , but registration failed , and the network is not always available , sometimes lost sometimes appear .

and the telnet there is a log like this .

what's wrong with this ?
what should i do?

Pages: [1] 2