1
Yate users hangout place / Re: YateBTS: How voice is send when two GSM phones are talking
« on: May 16, 2016, 02:23:34 PM »
We do not provide information on how to use YateBTS to spy legal or ilegal on phone users.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Yate users hangout place / Re: cisco dss1 with mgcpca.conf
« on: May 16, 2016, 02:22:40 PM »
Hello,
Yate doesn't support IUA.
Diana
Yate doesn't support IUA.
Diana
3
YateBTS / Re: YateBTS - Getting subscribers
« on: May 13, 2016, 04:00:05 AM »
If you run a BTS for testing you have to do it in such a way that you won't disturb others.
To get all the phones in the area to connect to your BTS is ilegal since you don't own the spectrum license and you interfere with the service.
To get all the phones in the area to connect to your BTS is ilegal since you don't own the spectrum license and you interfere with the service.
4
YateBTS / Re: BladeRF issues - UPDATED
« on: July 20, 2015, 07:54:52 AM »
Use the latest YateBTS SVN with the latest Yate SVN.
5
YateBTS / Re: Registration failed on network 2
« on: July 20, 2015, 05:35:45 AM »
Nurwalid: Dburgess is the guy who wrote openbts 
Try to make a full clean up and get the latest yatebts.
Diana
Try to make a full clean up and get the latest yatebts.
Diana
6
Yate based projects / Re: Improve coverage
« on: July 09, 2015, 04:22:06 AM »
Hello,
Yes. SatSite uses power amplifiers to get 10W output.
Diana
Yes. SatSite uses power amplifiers to get 10W output.
Diana
7
Features requests / Re: m3ua support?
« on: July 09, 2015, 04:20:23 AM »
Yate is not stored in the github, but in our own SVN repository. - http://www.yate.ro/community.php?page=svn
The M3UA support exists in the commercial version of Yate.
The M3UA support exists in the commercial version of Yate.
8
Yate users hangout place / Re: need debug of yate server on windows 7 64 bit
« on: April 16, 2015, 02:33:11 AM »
What you need is to run the server with a set of configuration files and the client with a different set of configuration files.
One set will setup the SIP port on 5060 and the other one on port 5062 (let's say).
One set will setup the SIP port on 5060 and the other one on port 5062 (let's say).
9
Yate users hangout place / Re: Open Source SS7 stack.
« on: April 16, 2015, 02:32:18 AM »
look for the ysig module and keep in mind to respect our GPL v2 license.
10
YateBTS / Re: Running YateBTS on BladeRF (Video)
« on: March 31, 2015, 02:14:36 AM »
Really really cool.
11
YateBTS / Re: filter for RX antenna
« on: December 17, 2014, 03:33:07 AM »
Try calibrating the BladeRF first.
12
YateBTS / Re: YateBTS initial setup with bladeRF x115
« on: November 28, 2014, 09:06:49 AM »
Use ps -ef|grep yate
tell us how many yate instances you see. If you see more than one most likely you started twice.
tell us how many yate instances you see. If you see more than one most likely you started twice.
13
Features requests / Re: Yate Codec2 module
« on: September 16, 2014, 07:28:30 AM »
Any idea what is the SIP payload for this?
Diana
Diana
14
Features requests / Re: sqlite3 db
« on: September 16, 2014, 07:25:58 AM »
you wish came true.
tomorrow there will be an sqlite3 module in yate
Diana
tomorrow there will be an sqlite3 module in yate
Diana
15
YateBTS / Re: Help with Outbound phone calls voice cutting out.
« on: August 22, 2014, 09:10:21 AM »
ThePit and we will continue to make it even more stable. It's a lot of work and we are rewriting some serious parts of mbts (the fork of OpenBTS we are using).
There are a lot of things going on to make this a carrier grade solution.
There are a lot of things going on to make this a carrier grade solution.