hello,
I want to use Yate as h.323 gatekeeper and Cisco router 2811 as gateway. I have tried for several days but failed to connect the Cisco router to Yate. The IP address of router is 10.0.0.3, the IP address of the computer running Yate server is 10.0.0.2. I have modified the h323chan.config as following. Please tell me whether it is right or what else I should do. Thank you !!
[gk]
; If server is true the gatekeeper of yate will start. You must understand that
; the H323EndPoint and H323GateKeeper share the calls. So you can make a call
; to a registered endpoint of this gatekeeper even if in the [ep] section
; you haven't register the local H323EndPoint to the local H323Gatekeeper. In
; fact is not recomanded to register the local EndPoint to the local GateKeeper.
; The local H323EndPoint is used as proxy for calls to local non h323
; destinations. If you wanna call let's say tone/dial from a registered
; endpoint to the local gatekeeper, you must make a route in regexroute (or
; whatever you use) and then just dial the number.
; If you wanna call a registered endpoint you must use now as a module register
; since is the only module who can record prefixes right now.
; server: bool: Enable running a gatekeeper on the main endpoint
server = true
; You must define the binding interfaces. Right now the multi hosted boxes don't
; work very well because OpenH323 mechanism, but we will fix that if someone
; have any problem.
interface1=10.0.0.2
; port: int: Port on which the gatekeeper listens for connections
port = 1719
; name: string: Identifier of the gatekeeper
name = GK-TEST
; ttl: int: Registrations time to live in seconds, 0 to disable
;ttl = 600
; heartbeatdrop: bool: Drop calls for which the heartbeat timed out
;heartbeatdrop=true
; registeredonly: bool: Allow calls only with registered endpoints
;registeredonly=false
