Dial tone can't hear

[myomobile]

Hi,

When I dial internal call 301 to 302,I can't hear dial tone from caller.But 302 will ring and can talk each other.Is there any configuration file for that.

Best regards,
Tay

[marian]

There is no configuration for it.

If the called client don't provide ringback you may use fork.
See http://docs.yate.ro/wiki/Call_Forker#Providing_fake_ringback_tone_while_fallback_calling_through_different_gateways

[SugarCakes]

Marian,

Could you please explain how you would do this.
I think you suggested doing:

^1$=fork;callto.1=tone/ring;callto.2=sip/sip:1@host1;callto.3=h323/2@host2;callto.4=|;\
 callto.5=sip/sip:3@host3;stoperror=busy;maxcall=20000;\
 callto.1.fork.calltype=persistent;callto.1.fork.autoring=true;\
 callto.1.fork.automessage=call.progress

But where do you put this file? and where are the tone files from?

The webpage you mention also has:

Providing just ringback tone
Use the fork.fake to set the fake early media. This is an easy way to provide custom ringback.
^1$=fork sip/sip:1@host1;fork.fake=tone/ring

Again where would you put this if you wanted it to happen.
We have good progress with our network but a dial tone is very important for us to check calls are making.

Thanks!

[marian]

These are regex rules. The file is regexroute.conf.

tone/ring is a target to tonegen (tone generator) module. It is a generated tone.

If you want a custom tone see the wave file module:
http://docs.yate.ro/wiki/Wavefile

[SugarCakes]

Super thanks for the reply.

To get Yate to use regexroute.conf do you have to remove the line
[general]
routing=welcome.js

from javascript.conf

I ask because I can see that regexroute.conf has some test numbers in such as 99991001, however when I try to ring these I get a call failed message.

Thanks