Author Topic: Sangoma + ISUP + error in the calculation of floating point  (Read 11915 times)

dj_ndc

  • Newbie
  • *
  • Posts: 28
    • View Profile
Sangoma + ISUP + error in the calculation of floating point
« on: September 04, 2015, 02:32:52 AM »
Hello

Has someone solved issue that was posted to mailing group 22 Aug 2013:

http://yate.null.ro/archive/?action=show_msg&actionargs[]=86&actionargs[]=4

I have the same problem with Yate (6967), and WANPIPE Release: 7.0.14. When I disable:

;voicegroup=w1g2

in wpcard.conf MTP3 goes Up and operational:

module=sig,component=linkset1,type=ss7-mtp3;status=operational

and receive:

2015-09-04_10:28:45.781650 <linkset1:MILD> Received SLTM ITU,0-13-7:0-27-6:0 (111:222:0) wrong National NI with 6 bytes
2015-09-04_10:28:45.781722 <linkset1:MILD> Sending SLTA ITU,0-27-6:0-13-7:0 (222:111:0) with 6 bytes

When I enable "voicegroup=w1g2" in wpcard.conf. I get error:

Sep  4 10:29:41 ss7 kernel: [74482.610146] YSIG Trunk[7207] trap divide error ip:7f504ac59ae0 sp:7f5047b46dc0 error:0 in ysigchan.yate[7f504ac46000+29000]
Sep  4 10:29:41 ss7 kernel: [74482.612867] af_wanpipe: MAJOR ERROR, Data lost on sock release !!!

Yate reports:

The error in the calculation of floating point.

dj_ndc

  • Newbie
  • *
  • Posts: 28
    • View Profile
Re: Sangoma + ISUP + error in the calculation of floating point
« Reply #1 on: September 04, 2015, 04:44:57 AM »
There is no problem with configuration as 4 PRA definded as "euro-isdn-e1", the problem is when configuration use "ss7-isup".

dj_ndc

  • Newbie
  • *
  • Posts: 28
    • View Profile
Re: Sangoma + ISUP + error in the calculation of floating point
« Reply #2 on: September 04, 2015, 07:25:31 AM »
It is working fine, when I have configured rest 3 ports as "isdn-pri-cpe".

Shellyjand

  • Newbie
  • *
  • Posts: 1
    • View Profile
Sangoma ISUP error in the calculation of floating point
« Reply #3 on: August 17, 2016, 06:59:39 AM »
It says it has required information missing and to resort here if it continues to have the error msg which it does. Please help. I want to finish the episode