Author Topic: Yate Mini Core  (Read 725 times)

vld

  • Newbie
  • *
  • Posts: 2
    • View Profile
Yate Mini Core
« on: June 28, 2018, 11:15:02 PM »
Hello ,
We buy Yate Mini Core . Try to do installation .
And I cannot configure internal SS7 links . In this moment I have all modules (UCN,HLR,STP) in status Disconnected .
Could You help ?

afk

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Yate Mini Core
« Reply #1 on: June 29, 2018, 01:51:59 AM »
Hello vld,

Please provide us the serial number of your equipment or your company name, to recognize your order.

Thank you very much.


afk

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Yate Mini Core
« Reply #2 on: June 29, 2018, 02:09:11 AM »
Thank you for your answer, please start the openvpn.service (systemctl restart openvpn@hostedcore.service) in order to connect to equipment and debug.
(Is not enabled on start-up by default)



afk

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Yate Mini Core
« Reply #3 on: June 29, 2018, 02:14:31 AM »
Hello ,
We buy Yate Mini Core . Try to do installation .
And I cannot configure internal SS7 links . In this moment I have all modules (UCN,HLR,STP) in status Disconnected .
Could You help ?

In order to configure internal SS7 links you need to access MMI and check network settings (SS7 section) and then each equipment SS7 settings.
The MiniCore was pre-configured on 00101 test network, I saw that you've edit the settings  (I suppose) to match your network.

I will try to connect to MMI and recheck the whole configuration.
I prefer to not touch any config files from the server(MiniCore) myself as the MMI already is capable to edit/configure the network and the equipments.

vld

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Yate Mini Core
« Reply #4 on: June 29, 2018, 02:21:04 AM »
"Thank you for your answer, please start the openvpn.service (systemctl restart openvpn@hostedcore.service) in order to connect to equipment and debug.
(Is not enabled on start-up by default)"
I did it . May be we can move to Skype ?

afk

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Yate Mini Core
« Reply #5 on: June 29, 2018, 02:26:39 AM »
Sure we can.

I've checked the configurations and saw that you've set the local port in the STP node same for all the other nodes. (3500)
It should be unique for each node.

This is your configuration now:

[root@core-SERIAL stp]# cat sigtransport.conf
[$include sigtran-custom.conf]

[general]
updated=Friday, 29-Jun-18 07:33:30 GMT from 127.0.0.1
locked=false

[my_YateSMSC_103_0]
type=sctp
stream=no
endpoint=no
local=127.0.0.1:3500
remote=127.0.0.1:5016

[my_YateHSS_101_0]
type=sctp
stream=no
endpoint=no
local=127.0.0.1:3500
remote=127.0.0.1:5014

[my_YateUCN_102_0]
type=sctp
stream=no
endpoint=no
local=127.0.0.1:3500
remote=127.0.0.1:5015
[root@core-SERIAL stp]#


Please Edit each node -> SS7 settings and set a uniq remote/adjacent port for each equipment.
« Last Edit: June 29, 2018, 02:36:20 AM by afk »