Author Topic: BladeRF 2.0 micro xA4 Noise Problem  (Read 3428 times)

SkySegel

  • Newbie
  • *
  • Posts: 1
    • View Profile
BladeRF 2.0 micro xA4 Noise Problem
« on: July 06, 2020, 08:01:27 AM »
Hello everyone,
i'm using the bladerf 2.0 micro xA4 with the yatebts software from the nuand yate-rc tarball. I'm getting a noise value between -10 and -25 dB from mbts noise command - regardless what I'm adjusting at the rx gain level. Together with the BT-200 LNA the noise is even worser. I tried with agc and without - no difference. The hardware itself seems to work since I get good results with gqrx.
I'm working on this issue now for a couple of weeks and running currently out of options.
Is anyone using the bladerf 2.0 micro xA4 successfully with yatebts ?

Thank you in advance!

jhutchins

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: BladeRF 2.0 micro xA4 Noise Problem
« Reply #1 on: July 27, 2020, 03:43:06 AM »
Are you able to use yate with an xA4 with any success? The only person I've spoken to in the last 2 years who has been able to use yate with an xA4 is Robert Ghilduta   ::)  I've found many other uses for it though so definatley not saying I have buyers remorse but not aware of anyone else to get it  working with yate
« Last Edit: July 27, 2020, 03:49:06 AM by jhutchins »