route not work

[Bamper]

I have some problem width regexroute module

my config:
accfile.conf

Code: [Select]

[sip_1]
enabled=yes
protocol=sip
username=941234567
authname=941234567
password=1111
registrar=sip.domain.com (example)
domain=sip.domain.com (example)


regfile.conf

Code: [Select]

[941234567]
password=123456789

[100]
password=123456789


regexroute.conf

Code: [Select]

[default]
^38\(.*\)$=sip/sip:\1;line=sip_1;osip_From=<sip:941234567@MY_SERVER_IP>
^sip_1$=route/941234567

function route works only when username (from accfile.conf) = sip user
if I change the 941234567 on 100 - get error:

Code: [Select]

<sip/1:MILD> Call rejected error='noroute' reason='No route to call target'

[marian]

The right side of the '=' in route handlers is the target to route the call to.
E.g. for sip is sip/...
What target is route/ ?
Do you have a module executing the call when the target starts with 'route/'?

[Bamper]

if I delete all rules from regexroute.conf
all incoming calls are still receives sip-user 941234567

[marian]

What do you mean by 'all incoming calls are still receives sip-user 941234567'?

Calls to 941234567 are sent to registered user '941234567'?
This is ok, regfile has its own call.route handler and route calls to registered users.

[Bamper]

yes
but I want send all incoming calls to registered sip-user 100

how I can did it?

[marian]

Set a lower value in regexroute call.route handler.
regexroute.conf:
[priorities]
route=90

This will allow regexroute to handle call.route before regfile.

Changed called number to 100 and let the call.route be handle by regfile:

[default]
.*=return false;called=100

[Bamper]

Thanks!!!
it works!