Author Topic: [SOLVED] cannot understand on telnet  (Read 5412 times)

nurwalid

  • Newbie
  • *
  • Posts: 30
    • View Profile
[SOLVED] cannot understand on telnet
« on: April 23, 2015, 12:09:12 AM »


what should i do with this??
« Last Edit: April 23, 2015, 07:25:09 PM by nurwalid »

Ioana Stanciu

  • Jr. Member
  • **
  • Posts: 79
    • View Profile
Re: cannot understand on telnet
« Reply #1 on: April 23, 2015, 01:13:00 AM »
Hi,

Most likely the ybts module is not loaded.
Try 'status ybts' or 'status mbts' in the rmanager console. If it's showing as a result
%%+status:ybts
%%-status

then you don't have the module loaded.
Check your configuration and that the path from where you're loading modules contains ybts.
You can check from where yate tries to load modules by typing in rmanager the command 'status engine' and look at the 'modulepath' parameter .

nurwalid

  • Newbie
  • *
  • Posts: 30
    • View Profile
Re: cannot understand on telnet
« Reply #2 on: April 23, 2015, 09:00:02 AM »




like that? after that, what should i do oana?

nurwalid

  • Newbie
  • *
  • Posts: 30
    • View Profile
Re: cannot understand on telnet
« Reply #3 on: April 23, 2015, 07:24:49 PM »
SOLVED !! thanks oana

edit file yate.conf on /usr/local/etc/yate/

[general]
modload=no ===> modload=yes