How to manually set the argument for SIP method "REGISTER"?

[ogogon]

Dear colleagues, I have not quite typical question.

I need to manually set the argument for SIP method "REGISTER".

I use Yate for acces to multiple accounts of one large telephone operator.
Access is via a corporate network that uses the intranet address. DNS servers in it are not available.
Nevertheless, by their rules, the argument to the command "register" must be not IP-address, but the internal domain name of registration server. This is a condition of their authorization system and this issue is not discussed.

I set IP-address of the registrar, because appeal to their DNS is not possible:

registrar=10.XXX.YYY.ZZZ:5060

On this basis, Yate forms the argument of the method "REGISTER":

REGISTER sip:[10.XXX.YYY.ZZZ:5060] SIP/2.0

But according to the rules I need to create completely different argument.

REGISTER sip:ims.intranet.telephonic.com SIP/2.0

How can I do that?

Advance grateful for the answer on the subject matter,
Ogogon.

[Monica Tepelus]

Hi,

Try setting this in the /etc/hosts on the machine where yate is running:

10.XXX.YYY.ZZZ  ims.intranet.telephonic.com

and in accfile.conf

 registrar=ims.intranet.telephonic.com

5060 is the default port, so you don't need to specify it

[marian]

Try to set registrar address in outbound parameter and registrar to required domain:

outbound=10.XXX.YYY.ZZZ:5060
registrar=ims.intranet.telephonic.com

[ogogon]

Try to set registrar address in outbound parameter and registrar to required domain:

outbound=10.XXX.YYY.ZZZ:5060
registrar=ims.intranet.telephonic.com

Thank you. Your variant has successfully registered.

Ogogon.