Topics

1

Yate users hangout place / How to reject or filter Mobile station from my service.

« on: January 29, 2015, 03:52:57 PM »

Hi everyone.
On subscribers.conf file i used
regexp=.*
thats why it is now on open registration and any mobile station can easily connect with yatebts.
At present i have no sim card writer . is there any way to block some mobile station or reject there connection without using sim card? Or any  filtering system to maintain the connection of expected mobiles and ban the others.Thanks

2

YateBTS / Running YateBTS on BladeRF (Video)

« on: January 16, 2015, 02:04:25 AM »

I have installed YateBTS sucessfully on my bladerf x115 device. You may see the video from this link.(http://youtu.be/3iirE8xuji4). if u have any question ,Please ask me without any hesitation in Twitter.(https://twitter.com/Habibur18495307). Thanks

3

YateBTS / YateBts Running problem-assuming TRX is dead

« on: December 26, 2014, 11:10:52 AM »

hi everyone.
i am using bladerf x115 with ubuntu 14.04. i am trying to run YateBts. when i use this command .sudo yate -sd -vvvvv -l /var/yate.log. my radio device response and the output of log file is
  Primitive: RadioReady
    Info: 0
    -----
    2014-12-22_23:18:19.818500 <ybts:NOTE> State changed Running -> RadioUp
    ALERT 140558074234624 23:18:23.0 TRXManager.cpp:500:setSlot: SETSLOT failed with status -1
    2014-12-22_23:18:23.060594 <mbts:WARN> TRXManager.cpp:500:setSlot: SETSLOT failed with status -1
    ALERT 140558074234624 23:18:23.0 TRXManager.cpp:500:setSlot: SETSLOT failed with status -1
    2014-12-22_23:18:23.061568 <mbts:WARN> TRXManager.cpp:500:setSlot: SETSLOT failed with status -1
    ALERT 140558075676416 23:18:25.0 TRXManager.cpp:460:setPower: SETPOWER failed with status -1
    2014-12-22_23:18:25.065011 <mbts:WARN> TRXManager.cpp:460:setPower: SETPOWER failed with status -1
    ALERT 140558075676416 23:18:31.0 TRXManager.cpp:460:setPower: SETPOWER failed with status -1
    2014-12-22_23:18:31.065464 <mbts:WARN> TRXManager.cpp:460:setPower: SETPOWER failed with status -1
    EMERG 140558112577280 23:18:44.2 TRXManager.cpp:96:clockHandler: TRX clock interface timed out, assuming TRX is dead.
    2014-12-22_23:18:44.228273 <mbts:GOON> TRXManager.cpp:96:clockHandler: TRX clock interface timed out, assuming TRX is dead.


i already change USB cable, and also use an external power source , and also try another laptop with fresh ubuntu 14.04. but still say

TRX clock interface timed out, assuming TRX is dead

please any one give me any tips or idea about this problem. Thanks

4

Installation from packets/SVN/.exe/AppStore / powerOff: POWEROFF failed with status -1

« on: December 11, 2014, 07:50:04 AM »

Hi every one.
when i run sudo yate -sd -vvvvv -l /var/yate.log. the log file show me this error.


ALERT 140371742193536 07:20:27.7 TRXManager.cpp:430:powerOff: POWEROFF failed with status -1
2014-12-11_07:20:27.721808 <mbts:NOTE> TRXManager.cpp:293:sendCommandPacket: lost control link to transceiver
2014-12-11_07:20:27.722302 <mbts:WARN> TRXManager.cpp:430:powerOff: POWEROFF failed with status -1
2014-12-11_07:20:27.789979 <mbts:NOTE> OpenBTS.cpp:144:startTransceiver: starting transceiver ./transceiver-bladerf w/ 1 ARFCNs and Args:
2014-12-11_07:20:28.403054 <transceiver:NOTE> bladeRFDevice.cpp:106:open: Opened bladeRF serial=bf922ab76ae11915ff145093139e3eb7 firmware version$
2014-12-11_07:20:29.021937 <transceiver:NOTE> Transceiver.cpp:68:Transceiver: running 1 ARFCNs with oversampling 4

and hence my transceiver tx rx  led not blinking. is there any solution about POWEROFF failed with status -1? Thanks

5

Installation from packets/SVN/.exe/AppStore / <ybts:CONF> Missing radio band or C0 configuration

« on: December 09, 2014, 06:33:03 AM »

When i write this command ''sudo yate -sd -vvvvv -l /var/yate.log''  the log file show me
<ybts:CONF> Missing radio band or C0 configuration
but i edit my ybts.conf file by Nano text editor by this command  sudo nano ybts.conf.  and save it.
i use
Radio.Band=1800
Radio.C0=512..885
 but showing the same thing.i also set the transceiver path as Path=./transceiver-bladerf

6

Installation from packets/SVN/.exe/AppStore / Yate not start

« on: December 07, 2014, 11:15:18 AM »

i m using ubuntu 14.04. i follow the instruction of wiki. at the time of installation there is no error. now i use this command  sudo yate -sd -vvvvv -l /var/log/yate.log  nothing happen ,no error shown, nothing shown on my terminal.please someone help me. thanks

7

YateBTS / YateBTS with bladeRF x115: No yate.log file

« on: December 07, 2014, 07:01:09 AM »

Hi everyone
i use ubuntu 14.04. i have installed yate and yatebts follow the instruction  from http://wiki.yatebts.com/index.php/Installing . my radio board is bladerf x115. but the main problem is there is yate.log file in my /var/log/ detectory . i also check here /usr/src/yate/ .but same case ,there is no logfolder or yate.log file. so when i use this command '' yate -sd -vvvvv -l /var/log/yate.log'' nothing is happening .terminal reaterns home detectory. when i use this /usr/src/yate/logfiles/yate.log
nothing is happening .terminal reaterns home detectory. is there any way to create yate.log file?  please someone help me about this issue.
thanks