1
Does anybody successfully run YateBTS with RPi4 (bladeRF x40)? Too much errors, like on RPi3. Can’t set desired amount of C1s.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
YateBTS / transciever-bladerf is not multi-CPU?
« on: November 10, 2018, 06:30:22 AM »
Hi,
I have problems increasing ARFCNs on bladeRF x40 with yateBTS 5.x branch. It seems transciever-bladerf process can utilize only single CPU? I see Yate crashes after it reaches 100-120% CPU. USB is version 3.1.
I have problems increasing ARFCNs on bladeRF x40 with yateBTS 5.x branch. It seems transciever-bladerf process can utilize only single CPU? I see Yate crashes after it reaches 100-120% CPU. USB is version 3.1.
3
YateBTS / TRX clock interface timed out
« on: October 31, 2018, 04:00:04 AM »
Trying Yate 5.x branch (because 6.x is not working normally for me). Sometimes get "TRX clock interface timed out, assuming TRX is dead". Any way to fix it? Firmware 1.8.0 (1.9.1 show unstable results), FPGA 0.1.2, USB3 bare metal.
4
YateBTS / Excessive TOA errors
« on: October 29, 2018, 08:11:39 AM »
What does "Excessive TOA error" mean? And how to fix? The latest version of Yate/YateBTS, and Core i7 hardware with USB3.
Code: [Select]
2018-10-29_14:09:40.417826 <gsmtrx:ALL> ARFCN[2]: Slot 1. Excessive TOA error=4 peak/mean=3.60989 count=1 [0x7f8ccc034490]
2018-10-29_14:09:50.582163 <gsmtrx:ALL> ARFCN[0]: Slot 2. Excessive TOA error=3 peak/mean=3.87052 count=1 [0x7f8ccc02a700]
2018-10-29_14:09:51.049245 <gsmtrx:ALL> ARFCN[2]: Slot 4. Excessive TOA error=5 peak/mean=3.24723 count=1 [0x7f8ccc034490]
2018-10-29_14:09:51.236267 <gsmtrx:ALL> ARFCN[2]: Slot 0. Excessive TOA error=-3 peak/mean=3.34375 count=1 [0x7f8ccc034490]
2018-10-29_14:09:55.009369 <gsmtrx:ALL> ARFCN[0]: Slot 5. Excessive TOA error=3 peak/mean=3.06478 count=1 [0x7f8ccc02a700]
2018-10-29_14:09:55.012046 <gsmtrx:ALL> ARFCN[0]: Slot 1. Excessive TOA error=-5 peak/mean=3.10363 count=1 [0x7f8ccc02a700]
2018-10-29_14:09:55.019534 <gsmtrx:ALL> ARFCN[1]: Slot 6. Excessive TOA error=-5 peak/mean=3.63586 count=1 [0x7f8ccc02dbe0]
2018-10-29_14:09:55.031650 <gsmtrx:ALL> ARFCN[2]: Slot 3. Excessive TOA error=3 peak/mean=3.75816 count=1 [0x7f8ccc034490]
2018-10-29_14:09:55.129341 <gsmtrx:ALL> ARFCN[2]: Slot 4. Excessive TOA error=4 peak/mean=3.19134 count=1 [0x7f8ccc034490]
2018-10-29_14:10:02.777870 <gsmtrx:ALL> ARFCN[2]: Slot 6. Excessive TOA error=5 peak/mean=3.37695 count=1 [0x7f8ccc034490]
2018-10-29_14:10:03.517494 <gsmtrx:ALL> ARFCN[2]: Slot 7. Excessive TOA error=-3 peak/mean=3.20965 count=1 [0x7f8ccc034490]
2018-10-29_14:10:18.743594 <gsmtrx:ALL> ARFCN[0]: Slot 7. Excessive TOA error=-3 peak/mean=3.62814 count=1 [0x7f8ccc02a700]
2018-10-29_14:10:18.755647 <gsmtrx:ALL> ARFCN[0]: Slot 4. Excessive TOA errors 1 [0x7f8ccc02a700]
2018-10-29_14:10:18.777079 <gsmtrx:ALL> ARFCN[0]: Slot 2. Excessive TOA error=3 peak/mean=3.85228 count=1 [0x7f8ccc02a700]
2018-10-29_14:10:19.586645 <gsmtrx:ALL> ARFCN[0]: Slot 5. Excessive TOA error=-5 peak/mean=3.47341 count=1 [0x7f8ccc02a700]
2018-10-29_14:10:20.038746 <gsmtrx:ALL> ARFCN[2]: Slot 4. Excessive TOA error=-5 peak/mean=3.01486 count=1 [0x7f8ccc034490]
2018-10-29_14:10:20.134673 <gsmtrx:ALL> ARFCN[2]: Slot 3. Excessive TOA error=-5 peak/mean=3.19816 count=1 [0x7f8ccc034490]
2018-10-29_14:10:28.677317 <gsmtrx:ALL> ARFCN[2]: Slot 2. Excessive TOA error=-3 peak/mean=3.44227 count=1 [0x7f8ccc034490]
2018-10-29_14:10:32.643796 <gsmtrx:ALL> ARFCN[2]: Slot 5. Excessive TOA error=5 peak/mean=3.18953 count=1 [0x7f8ccc034490]
2018-10-29_14:10:32.808468 <gsmtrx:ALL> ARFCN[2]: Slot 2. Excessive TOA error=3 peak/mean=3.34153 count=1 [0x7f8ccc034490]
2018-10-29_14:10:32.917366 <gsmtrx:ALL> ARFCN[2]: Slot 7. Excessive TOA error=3 peak/mean=3.26136 count=1 [0x7f8ccc034490]
2018-10-29_14:10:33.190038 <gsmtrx:ALL> ARFCN[2]: Slot 0. Excessive TOA error=4 peak/mean=3.01768 count=1 [0x7f8ccc034490]
2018-10-29_14:10:33.190990 <gsmtrx:ALL> ARFCN[2]: Slot 1. Excessive TOA error=-3 peak/mean=3.11987 count=1 [0x7f8ccc034490]
2018-10-29_14:10:33.236505 <gsmtrx:ALL> ARFCN[0]: Slot 1. Excessive TOA error=-4 peak/mean=3.34259 count=1 [0x7f8ccc02a700]
2018-10-29_14:10:33.865456 <gsmtrx:ALL> ARFCN[2]: Slot 2. Excessive TOA error=3 peak/mean=3.55914 count=1 [0x7f8ccc034490]
5
YateBTS / Max number of concurrent calls
« on: October 21, 2018, 12:00:31 PM »
I have unresolved problem: how to raise concurrent calls to 28? I use bladerf x40 w/ USB3. FPGA 0.1.2, FW 1.8.0. I set:
Radio.ARFCNs=4
Channels.NumC1s=28
Channels.NumC7s=3
Radio.RSSITarget=-35
Some phone models can connect up to 28 concurrently, some models can connect not more than 10, sometimes 2-3. Just don't place a call, or lost network, etc. What could it be? Moreover, when many phones, YateBTS lost connection with bladeRF and starts freezing, on both versions, 5.x and 6.x.
There are so many parameters in [gsm_advanced] section, should I alter something else to make it work stable?
Radio.ARFCNs=4
Channels.NumC1s=28
Channels.NumC7s=3
Radio.RSSITarget=-35
Some phone models can connect up to 28 concurrently, some models can connect not more than 10, sometimes 2-3. Just don't place a call, or lost network, etc. What could it be? Moreover, when many phones, YateBTS lost connection with bladeRF and starts freezing, on both versions, 5.x and 6.x.
There are so many parameters in [gsm_advanced] section, should I alter something else to make it work stable?
6
Yate bugs / <WARN> Could not increase max file handle: Operation not permitted (1)
« on: October 18, 2018, 09:30:32 AM »
What additional permissions require `yate` user?
Code: [Select]
<WARN> Could not increase max file handle: Operation not permitted (1)
7
Yate bugs / YateBTS freezes randomly
« on: October 17, 2018, 12:45:33 PM »
Hello!
Need your help
. I use Yate 6.1.0 and YateBTS 6.1.0 built from sources, and sometimes (often) it freezes. I attached a part of debug log. Please note the string in the log below:
First of all, why it get timeout? Why process freezes, if it really freezes? After that YateBTS can't kill it, and restarting itself. After one or two restarts (sorry, I don't know how to get info about restarts count) it stops announce its network, and only manual 'service yate restart' helps.
Need your help
. I use Yate 6.1.0 and YateBTS 6.1.0 built from sources, and sometimes (often) it freezes. I attached a part of debug log. Please note the string in the log below:Code: [Select]
2018-10-17_18:08:49.002954 <ybts-signalling:WARN> Timeout while waiting for heartbeat [0x55bc9bc266f0]First of all, why it get timeout? Why process freezes, if it really freezes? After that YateBTS can't kill it, and restarting itself. After one or two restarts (sorry, I don't know how to get info about restarts count) it stops announce its network, and only manual 'service yate restart' helps.
Code: [Select]
-----
Primitive: L3Message
Info: 0
Connection: 516
<CC>
<TID TIFlag="true">0</TID>
<Message type="Disconnect">
<Cause coding="GSM-PLMN" location="LPN">timeout</Cause>
</Message>
</CC>
-----
2018-10-17_18:07:37.003286 <ybts/197:CALL> Hangup reason='timeout' [0x7f6cd001ea70]
2018-10-17_18:07:37.003304 <ybts/197:CALL> Destroyed [0x7f6cd001ea70]
2018-10-17_18:07:37.003526 <wave:ALL> WaveConsumer::~WaveConsumer() [0x7f6c880377b0] total=4968320 stamp=2484160
2018-10-17_18:07:37.003534 <wave:INFO> WaveConsumer rate=15988 b/s
2018-10-17_18:07:37.003560 <wave/196:ALL> WaveChan::~WaveChan() wave/196 [0x7f6c8801afc0]
2018-10-17_18:07:37.003740 <javascript:ALL> Assistant for 'ybts/197' deleted
2018-10-17_18:07:37.137213 <ybts-signalling:INFO> Received [0x55bc9bc266f0]
-----
Primitive: PhysicalInfo
Info: 0
Connection: 516
<PhysicalInfo>TA=2 TE=0.000 UpRSSI=-21 TxPwr=6 DnRSSIdBm=-80 time=1539799656.669</PhysicalInfo>
-----
2018-10-17_18:07:37.137261 <ybts-signalling:INFO> Received [0x55bc9bc266f0]
-----
Primitive: L3Message
Info: 0
Connection: 516
<CC>
<TID TIFlag="false">0</TID>
<NSD>1</NSD>
<Message type="Release"/>
</CC>
-----
2018-10-17_18:07:37.137273 <ybts:NOTE> Removing terminated call 'i0' conn=516
2018-10-17_18:07:37.137278 <ybts:INFO> Call 'i0' changed state Disconnect -> Null
2018-10-17_18:07:37.137315 <ybts-signalling:INFO> Sending [0x55bc9bc266f0]
-----
Primitive: L3Message
Info: 0
Connection: 516
<CC>
<TID TIFlag="true">0</TID>
<Message type="ReleaseComplete">
<Cause coding="GSM-PLMN" location="LPN">timeout</Cause>
</Message>
</CC>
-----
2018-10-17_18:07:40.001106 <ybts-signalling:ALL> Connection 516 idle timeout [0x55bc9bc266f0]
2018-10-17_18:07:40.001130 <ybts-signalling:ALL> Releasing connection (0x7f6cd000ee20,516) [0x55bc9bc266f0]
2018-10-17_18:07:40.001156 <ybts-signalling:INFO> Sending [0x55bc9bc266f0]
-----
Primitive: ConnRelease
Info: 0
Connection: 516
-----
2018-10-17_18:07:47.001486 >>> DataTranslator::detachChain(0x7f6c88012f60,0x7f6c8801a290)
2018-10-17_18:07:47.001512 >>> DataTranslator::detachChain(0x7f6c88012f60,0x7f6c88039620)
2018-10-17_18:07:47.001522 <<< DataTranslator::detachChain
2018-10-17_18:07:47.001532 <ALL> GsmCodec::~GsmCodec() [0x7f6c88039620]
2018-10-17_18:07:47.001546 <<< DataTranslator::detachChain
2018-10-17_18:07:47.001584 <ybts/198:INFO> Call 'i0' changed state Active -> Disconnect [0x7f6cd001a380]
2018-10-17_18:07:47.001649 <ybts-signalling:INFO> Sending [0x55bc9bc266f0]
-----
Primitive: L3Message
Info: 0
Connection: 517
<CC>
<TID TIFlag="true">0</TID>
<Message type="Disconnect">
<Cause coding="GSM-PLMN" location="LPN">timeout</Cause>
</Message>
</CC>
-----
2018-10-17_18:07:47.001680 <ybts/198:CALL> Hangup reason='timeout' [0x7f6cd001a380]
2018-10-17_18:07:47.001710 <ybts/198:CALL> Destroyed [0x7f6cd001a380]
2018-10-17_18:07:47.001850 <wave:ALL> WaveConsumer::~WaveConsumer() [0x7f6c8801a290] total=4515840 stamp=2257920
2018-10-17_18:07:47.001859 <wave:INFO> WaveConsumer rate=14565 b/s
2018-10-17_18:07:47.001867 <wave/197:ALL> WaveChan::~WaveChan() wave/197 [0x7f6c88019ba0]
2018-10-17_18:07:47.002028 <javascript:ALL> Assistant for 'ybts/198' deleted
2018-10-17_18:07:48.741663 <ybts-signalling:INFO> Received [0x55bc9bc266f0]
-----
Primitive: PhysicalInfo
Info: 0
Connection: 517
<PhysicalInfo>TA=2 TE=0.000 UpRSSI=-31 TxPwr=6 DnRSSIdBm=-89 time=1539799668.694</PhysicalInfo>
-----
2018-10-17_18:07:48.741760 <ybts-signalling:INFO> Received [0x55bc9bc266f0]
-----
Primitive: L3Message
Info: 0
Connection: 517
<CC>
<TID TIFlag="false">0</TID>
<NSD>1</NSD>
<Message type="Release"/>
</CC>
-----
2018-10-17_18:07:48.741785 <ybts:NOTE> Removing terminated call 'i0' conn=517
2018-10-17_18:07:48.741797 <ybts:INFO> Call 'i0' changed state Disconnect -> Null
2018-10-17_18:07:48.741890 <ybts-signalling:INFO> Sending [0x55bc9bc266f0]
-----
Primitive: L3Message
Info: 0
Connection: 517
<CC>
<TID TIFlag="true">0</TID>
<Message type="ReleaseComplete">
<Cause coding="GSM-PLMN" location="LPN">timeout</Cause>
</Message>
</CC>
-----
2018-10-17_18:07:48.861527 <ybts-signalling:INFO> Received [0x55bc9bc266f0]
-----
Primitive: L3Message
Info: 0
Connection: 517
<CC>
<TID TIFlag="false">0</TID>
<NSD>0</NSD>
<Message type="Release">
<Cause coding="GSM-PLMN" location="U">timeout</Cause>
</Message>
</CC>
-----
2018-10-17_18:07:48.861604 <ybts-signalling:INFO> Sending [0x55bc9bc266f0]
-----
Primitive: L3Message
Info: 0
Connection: 517
<CC>
<TID TIFlag="true">0</TID>
<Message type="ReleaseComplete">
<Cause coding="GSM-PLMN" location="LPN">invalid-callref</Cause>
</Message>
</CC>
-----
2018-10-17_18:07:51.002487 <ybts-signalling:ALL> Connection 517 idle timeout [0x55bc9bc266f0]
2018-10-17_18:07:51.002504 <ybts-signalling:ALL> Releasing connection (0x7f6cd0005070,517) [0x55bc9bc266f0]
2018-10-17_18:07:51.002519 <ybts-signalling:INFO> Sending [0x55bc9bc266f0]
-----
Primitive: ConnRelease
Info: 0
Connection: 517
-----
2018-10-17_18:08:11.001069 <ybts-signalling:ALL> Removing released connection 516 [0x55bc9bc266f0]
2018-10-17_18:08:11.001107 <ybts-mm:ALL> Removed UE (0x7f6cd001c790): destroyed [0x55bc9bc1ae40]
2018-10-17_18:08:11.001121 <ybts:ALL> UE destroyed [0x7f6cd001c790]
2018-10-17_18:08:22.004833 <ybts-signalling:ALL> Removing released connection 517 [0x55bc9bc266f0]
2018-10-17_18:08:22.004862 <ybts-mm:ALL> Removed UE (0x7f6cd0023b80): destroyed [0x55bc9bc1ae40]
2018-10-17_18:08:22.004870 <ybts:ALL> UE destroyed [0x7f6cd0023b80]
2018-10-17_18:08:49.002954 <ybts-signalling:WARN> Timeout while waiting for heartbeat [0x55bc9bc266f0]
2018-10-17_18:08:49.003018 <ybts:NOTE> Peer pid 10188 has not exited - we'll kill it
2018-10-17_18:08:49.009639 <ybts:WARN> Peer pid 10188 has still not exited yet?
2018-10-17_18:08:49.070746 <ybts:WARN> Failed to kill peer pid 10188, leaving zombie
2018-10-17_18:08:49.070823 <ybts:ALL> Restart scheduled in 1ms [0x7f6cf9166500]
2018-10-17_18:08:49.070833 <ybts:ALL> Scheduled stop in 0ms
2018-10-17_18:08:49.077575 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11520704 1440088/0 T2=0 T3=1 [0x7f6cd4010580]
2018-10-17_18:08:49.125934 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11520784 1440098/0 T2=10 T3=11 [0x7f6cd4010580]
2018-10-17_18:08:49.170421 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11520864 1440108/0 T2=20 T3=21 [0x7f6cd4010580]
2018-10-17_18:08:49.216411 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11520944 1440118/0 T2=4 T3=31 [0x7f6cd4010580]
2018-10-17_18:08:49.262312 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11521024 1440128/0 T2=14 T3=41 [0x7f6cd4010580]
2018-10-17_18:08:49.312999 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11521112 1440139/0 T2=25 T3=1 [0x7f6cd4010580]
2018-10-17_18:08:49.359112 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11521192 1440149/0 T2=9 T3=11 [0x7f6cd4010580]
2018-10-17_18:08:49.405073 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11521272 1440159/0 T2=19 T3=21 [0x7f6cd4010580]
2018-10-17_18:08:49.451811 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11521352 1440169/0 T2=3 T3=31 [0x7f6cd4010580]
2018-10-17_18:08:49.497744 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11521432 1440179/0 T2=13 T3=41 [0x7f6cd4010580]
2018-10-17_18:08:49.548408 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11521520 1440190/0 T2=24 T3=1 [0x7f6cd4010580]
2018-10-17_18:08:49.594508 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11521600 1440200/0 T2=8 T3=11 [0x7f6cd4010580]
2018-10-17_18:08:49.640505 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11521680 1440210/0 T2=18 T3=21 [0x7f6cd4010580]
2018-10-17_18:08:49.687191 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11521760 1440220/0 T2=2 T3=31 [0x7f6cd4010580]
2018-10-17_18:08:49.733134 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11521840 1440230/0 T2=12 T3=41 [0x7f6cd4010580]
2018-10-17_18:08:49.783804 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11521928 1440241/0 T2=23 T3=1 [0x7f6cd4010580]
2018-10-17_18:08:49.829949 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11522008 1440251/0 T2=7 T3=11 [0x7f6cd4010580]
2018-10-17_18:08:49.875855 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11522088 1440261/0 T2=17 T3=21 [0x7f6cd4010580]
2018-10-17_18:08:49.922636 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11522168 1440271/0 T2=1 T3=31 [0x7f6cd4010580]
2018-10-17_18:08:49.968585 <gsmtrx:NOTE> ARFCN[0]: Missing SYNC burst at 11522248 1440281/0 T2=11 T3=41 [0x7f6cd4010580]
2018-10-17_18:08:50.001874 <ybts/199:INFO> Call 'i0' changed state Active -> Disconnect [0x7f6cd001b6b0]
2018-10-17_18:08:50.001967 <ybts-signalling:INFO> Sending [0x55bc9bc266f0]
-----
Primitive: L3Message
Info: 0
Connection: 519
<CC>
<TID TIFlag="true">0</TID>
<Message type="Disconnect">
<Cause coding="GSM-PLMN" location="LPN">interworking</Cause>
</Message>
</CC>
-----
2018-10-17_18:08:50.002006 <ybts-signalling:WARN> Socket send error: 111 Connection refused [0x55bc9bc266f0]
2018-10-17_18:08:50.002045 <ybts/199:CALL> Hangup reason='interworking' [0x7f6cd001b6b0]
2018-10-17_18:08:50.002078 >>> DataTranslator::detachChain(0x7f6c88038b60,0x7f6c88003f10)
2018-10-17_18:08:50.002087 >>> DataTranslator::detachChain(0x7f6c88038b60,0x7f6c88022a60)
2018-10-17_18:08:50.002095 <<< DataTranslator::detachChain
2018-10-17_18:08:50.002103 <ALL> GsmCodec::~GsmCodec() [0x7f6c88022a60]
2018-10-17_18:08:50.002115 <<< DataTranslator::detachChain
2018-10-17_18:08:50.002146 <ybts/199:CALL> Destroyed [0x7f6cd001b6b0]
2018-10-17_18:08:50.002184 <ybts/200:INFO> Call 'i0' changed state Active -> Disconnect [0x7f6cd001b260]
2018-10-17_18:08:50.002242 <ybts-signalling:INFO> Sending [0x55bc9bc266f0]
-----
Primitive: L3Message
Info: 0
Connection: 524
<CC>
<TID TIFlag="true">0</TID>
<Message type="Disconnect">
<Cause coding="GSM-PLMN" location="LPN">interworking</Cause>
</Message>
</CC>
-----
2018-10-17_18:08:50.002262 <ybts-signalling:WARN> Socket send error: 107 Transport endpoint is not connected [0x55bc9bc266f0]
2018-10-17_18:08:50.002304 <ybts/200:CALL> Hangup reason='interworking' [0x7f6cd001b260]
2018-10-17_18:08:50.002343 >>> DataTranslator::detachChain(0x7f6c8802e040,0x7f6c88028f60)
2018-10-17_18:08:50.002356 >>> DataTranslator::detachChain(0x7f6c8802e040,0x7f6c88003d10)
2018-10-17_18:08:50.002367 <<< DataTranslator::detachChain
2018-10-17_18:08:50.002377 <ALL> GsmCodec::~GsmCodec() [0x7f6c88003d10]
2018-10-17_18:08:50.002392 <<< DataTranslator::detachChain
2018-10-17_18:08:50.002430 <ybts/200:CALL> Destroyed [0x7f6cd001b260]
2018-10-17_18:08:50.002475 <ybts/201:INFO> Call 'i0' changed state Active -> Disconnect [0x7f6cd001d920]
2018-10-17_18:08:50.002571 <ybts-signalling:INFO> Sending [0x55bc9bc266f0]
-----
Primitive: L3Message
Info: 0
Connection: 525
<CC>
<TID TIFlag="true">0</TID>
<Message type="Disconnect">
<Cause coding="GSM-PLMN" location="LPN">interworking</Cause>
</Message>
</CC>
-----
8
YateBTS / Make more stable on USB2
« on: May 24, 2018, 12:14:26 AM »
Hi! Use YateBTS on hardware where is USB2 is the only way to connect. CPU is fine.
Yate 5.5.0 + YateBTS 5.0.0.
I want to prevent auto-restarting Yate. How to increase timeouts, or amount of failed attempts?
2018-05-24_04:19:56.121649 <transceiver:MILD> bladeRFDevice.cpp:611:writeSamples: Samples TX failed at 7076982529: Operation timed out
2018-05-24_04:19:56.621834 <transceiver:MILD> bladeRFDevice.cpp:611:writeSamples: Samples TX failed at 7076982781: Operation timed out
2018-05-24_04:19:57.122012 <transceiver:MILD> bladeRFDevice.cpp:611:writeSamples: Samples TX failed at 7076983033: Operation timed out
2018-05-24_04:19:57.622202 <transceiver:MILD> bladeRFDevice.cpp:611:writeSamples: Samples TX failed at 7076983285: Operation timed out
CRIT 1966216272 08:19:57.6 bladeRFDevice.cpp:948:checkHealth: Excessive I/O errors, bailing out
Yate 5.5.0 + YateBTS 5.0.0.
I want to prevent auto-restarting Yate. How to increase timeouts, or amount of failed attempts?
2018-05-24_04:19:56.121649 <transceiver:MILD> bladeRFDevice.cpp:611:writeSamples: Samples TX failed at 7076982529: Operation timed out
2018-05-24_04:19:56.621834 <transceiver:MILD> bladeRFDevice.cpp:611:writeSamples: Samples TX failed at 7076982781: Operation timed out
2018-05-24_04:19:57.122012 <transceiver:MILD> bladeRFDevice.cpp:611:writeSamples: Samples TX failed at 7076983033: Operation timed out
2018-05-24_04:19:57.622202 <transceiver:MILD> bladeRFDevice.cpp:611:writeSamples: Samples TX failed at 7076983285: Operation timed out
CRIT 1966216272 08:19:57.6 bladeRFDevice.cpp:948:checkHealth: Excessive I/O errors, bailing out
9
YateBTS / bladeRF x40 FPGA firmware?
« on: April 25, 2018, 11:42:21 AM »
Why the latest supported FPGA firmware for bladeRF x40 is 0.1.2? They fixed some things in the never versions. But when I try to use the newer firmware, I instantly get radio tune error and yate don't start. Do you have any plans to support newer versions of firmware?
10
YateBTS / System requirements?
« on: March 08, 2018, 12:25:33 AM »
Hi! I want to have 20 concurrent calls to Yate IVR autoresponder (on the same machine), via 2G YateBTS. Please recommend me the setup:
- OS (which Linux distro is better)
- CPU
- Memory
All I find were articles about Raspberry Pi 3 B. Will Raspberry Pi be good for my task? Which max calls + IVR Raspberry Pi can handle?
Radio is bladeRF x40.
- OS (which Linux distro is better)
- CPU
- Memory
All I find were articles about Raspberry Pi 3 B. Will Raspberry Pi be good for my task? Which max calls + IVR Raspberry Pi can handle?
Radio is bladeRF x40.
Pages: [1]