Hello, could You help (I am newbie) with ss7 ?
I need to initiate SIP call, set NAI=subscriber and pass it to operator via SIP-T.
my regexroute.conf (_ is a erased letter or digit):
.*=;message-prefix=isup.;\
isup.message-type=IAM;\
isup.protocol-type=itu-t92+;\
isup.CallingPartyNumber.nature=subscriber;\
isup.CalledPartyNumber.nature=subscriber;\
isup.CallingParty=257_;
^9$=sip/sip:99670671____@19_.21_.23_.6:5070;\
caller=${isup.CallingPartyNumber};\
diverter=${isup.RedirectingNumber};\
nai=${isup.CallingPartyNumber.nature};\
callername=${device};
debug output says:
{...}
param['isup.message-type'] = 'IAM'
param['isup.protocol-type'] = 'itu-t92+'
param['isup.CallingPartyNumber.nature'] = 'subscriber'
param['isup.CalledPartyNumber.nature'] = 'subscriber'
param['isup.CallingParty'] = '257_'
{...}
But Wireshark says (see attached file) in ISDN User Part of this called party has NAI=2 (unknown (national use)) and calling party has no NAI.
As far as i understand SS7 - Cg and Cd NAI must be equal to 1
Am i wrong ? If no - how to set NAI=subscriber
