Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - nurwalid

Pages: 1 [2]
YateBTS / Re: cannot understand on telnet
« on: April 23, 2015, 07:24:49 PM »
SOLVED !! thanks oana

edit file yate.conf on /usr/local/etc/yate/

modload=no ===> modload=yes

YateBTS / Re: cannot understand on telnet
« on: April 23, 2015, 09:00:02 AM »

like that? after that, what should i do oana?

YateBTS / [SOLVED] cannot understand on telnet
« on: April 23, 2015, 12:09:12 AM »

what should i do with this??

Linux / Re: GSM network is not detected by mobile phone
« on: April 17, 2015, 05:30:09 PM »

Start your yatebts with debug on and maximum debug per mbts and ybts and sniffer on and then power off your phone (unlocked phone) and start it again and check the logs.


start my yatebts with debug on telnet?
and the command is "debug on"?

for sniffer on, the command on telnet is "sniffer on"?

how about command for maximum debug per mbts and ybts?

YateBTS / Re: USRP on YateBTS
« on: April 13, 2015, 07:55:49 PM »
No problem,

If you need any help let me know,

hi dude..  what version of uhd for my project?

because with uhd newest version its doent work with USRP2 N210..

and i see in the openbts forum.. uhd and openbts is pairing? is it true? how about yatebts?

Linux / GSM network is not detected by mobile phone
« on: April 09, 2015, 12:06:50 AM »
My set up:
laptop using Linux ubuntu 14.04 64 bit desktop version.
Yate using newest version
Yate-bts using newset version
Radio board using USRP2 N210 with uhd

I have done with the documentation on yate-bts website, running, and set up NIB with "*" for open registration.

while telnet 5038 , all usrp indicator is on, gqrx capture data gsm.. but.. my mobile phone doesn,t detect a gsm signal made by yatebts.

any idea for this problem?

YateBTS / Re: USRP on YateBTS
« on: April 01, 2015, 08:17:25 PM »
Hi Nurwalid

The USRP B210 Works with Yate without any issues,

You need to ensure you have the  Uhd Software and drivers to your linux box.

When you have done that issue the command uhd_find_devices it should at that point show your usrp type and serial number

You can also issue uhd_usrp_probe it will dump firmware on the USRP and check it,  and give you a responce.

then in change your ybts.conf in /usr/local/etc/yate change the line in transceciver   path=./transceiver-uhd

Then launch yate if you have done everything right you will get a red light on the rx/tx port and a green light on the rx port.

Hope this helps

thank you ver mucy techguy... i will try this ...

YateBTS / Re: Error !! Could not open for writing on NIB (Regexp)
« on: March 22, 2015, 04:59:14 AM »
Hi asymetrix..

Okay.. I will try it.. Thanks before..

YateBTS / Re: Error !! Could not open for writing on NIB (Regexp)
« on: March 16, 2015, 03:16:34 AM »
Hi monica.. Thanks for your answer.. My problem has been finished ..

Web browser must be on root mode for this problem..

YateBTS / USRP on YateBTS
« on: March 15, 2015, 09:32:35 PM »

How do I know the USRP N210 has been connected with YateBTS ?
what is the command to connect ?

know. I have done
with prequirites, installing and running on the yatebts website. and network in box (i choose regexp ^001)

YateBTS / Re: Error !! Could not open for writing on NIB (Regexp)
« on: March 13, 2015, 03:24:25 AM »
Hi Monica

i've done and sure with the permission.

and how do I know, i don't have selinux or something similar that prevents apache to access other parts of the file system?

YateBTS / [SOLVED] Error !! Could not open for writing on NIB (Regexp)
« on: March 12, 2015, 08:51:57 PM »
I am using Ubuntu 14.04 LTS and USRP2 N210 with UHD.

I want to save regexp, but failed.

"Error !! Could not open file for writing"

what should i do for this error?


Linux / Re: [ASK] YateBTS Project
« on: February 24, 2015, 08:33:46 PM »
hi monica. I only have USRP, without having BladeRF, can I implement yatebts?

Linux / Re: [ASK] YateBTS Project
« on: January 30, 2015, 09:38:55 AM »
Hi Monica..

can i using ubuntu 14:04? for the first step, i must install NIB?

do i have to install YAteBTS, asterisk, Smsqueue ? When?

What should I install after NIB application?

(Sorry for my bad english)

Linux / [ASK] YateBTS Project
« on: January 29, 2015, 06:13:41 AM »
What operating system is best used for implementation yatebts?
And for hardware and software, what i need?

In yatebts website ( , i am very confused with explanation, I have not found an explanation or tutorial that I can understand.

I have a final project for my graduation requirements, And my project is " IMPLEMENTATION OF SHORT MESSAGE SERVICE ON THE GSM NETWORK USING YATE BTS".  i hope this forum can help me, thank's before

Pages: 1 [2]