Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - commeng7

Pages: [1]
1
YateBTS / Authenication Setup Issue
« on: August 05, 2016, 12:31:46 PM »
I am running my YATE Server in NIB mode and have input my SIM IMSIs and Kis into the subscriber.conf file (with 2G authentication, active=on).  However, the SRES that the gsm.auth code is producing is different than the SRES that I am receiving from the phone, so authentication fails.  Is there anything else I need to configure in order to have proper authentication?

2
YateBTS / YateBTS Congestion Error
« on: July 29, 2016, 08:49:34 AM »
I've been having trouble while testing the YateBTS with the following error (Some surrounding text attached for context):

2016-07-29_14:07:05.755688 <gsmtrx:ALL> ARFCN[0]: Slot 6. Excessive TOA errors 15 [0xb492c910]
2016-07-29_14:07:05.767364 <gsmtrx:ALL> ARFCN[0]: Slot 2. Excessive TOA errors 9 [0xb492c910]
2016-07-29_14:07:05.775368 <gsmtrx:INFO> ARFCN[0]: Slot 0. Receiver clipping 1.84604 dB (FN=15929) count=1 [0xb492c910]
CRIT 3026596944 14:07:05.7 RadioResource.cpp:255:AccessGrantResponder: congestion, RA=45 T3122=2
2016-07-29_14:07:05.777447 <mbts:WARN> RadioResource.cpp:255:AccessGrantResponder: congestion, RA=45 T3122=2
2016-07-29_14:07:05.778296 <gsmtrx:ALL> ARFCN[0]: Slot 2. Excessive TOA error=-3 peak/mean=4.49223 count=1 [0xb492c910]

This congestion error occurs even though I have only three phones attached to my test network and I am trying to make a call between two of them so there should not be any of the 7 connections open initially.  Additionally, the error only appears part of the time, about half of the time I can make calls fine and it does not seem to matter how many I make when I start it up and it works without issues.  Also, the CRIT message is always preceded by the "Slot 0. Receiver Clipping" line, which I can't seem to find in the code (However, the error does not appear every time the receiver clips, just on slot 0).

Can anyone help me with this issue?

3
Yate based projects / Single Computer, multiple BTS and BladeRF
« on: July 25, 2016, 01:35:19 PM »
I'm working on a project with a single computer that has multiple copies of yate (in separate Linux containers) and multiple bladeRFs attached.  My question is where in the code can I differential between the bladeRFs so that each instance of yate connects to a separate Radio and there is no interference?

Pages: [1]